Shortening shock length

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sarcvicious
    Forum Apprentice
    • Sep 2021
    • 91
    • Houston TX

    #1

    Shortening shock length

    To my understanding, stock shocks on the 82 Gs650 is 13. Would it be possible to fit 12 inch shocks? Im not asking for a lesson in geometry and trail. I realize shorter shocks would be increasing my trail.

    Basically, I have 12 inch ohlins that I just installed on my sporty, but they?re not the ones I want. I?m wondering if I could use these shocks on the shafty (I?m trying to turn this into a cafe racer). I know nothing about shaft drive and I?m not sure if there?s something I should be considering before changing the stock shock length.

    And yeah Ohlins might be overkill but if I can?t justify reusing these shocks then I can justify getting the shocks I want for my sporty.

    thoughts? Opinions?
    Main lady- 2009 Nightster 1200
    Project Lady- 1982 GS650 G
  • Grimly
    Forum Guru
    Past Site Supporter
    Super Site Supporter
    • Sep 2012
    • 5771
    • Ireland

    #2
    12 inchers will work, but be aware of the stress on the front propshaft UJ. Ideally, it should run straight for as much of the time as possible. A 1" drop at the shocks might not be enough to bother it overmuch.
    Certainly, I'd not fit anything shorter than 12".
    Dave
    '79 GS850GN '80 GS850GT
    Only a dog knows why a motorcyclist sticks his head out of a car window

    Comment

    • rphillips
      Forum Guru
      Past Site Supporter
      Super Site Supporter
      • Jun 2005
      • 7622
      • Norene TN

      #3
      My opinion, for what that's worth, You'll never know the difference except possibly in seat height. Heck wouldn't stock 13" shock with spring set at lowest pos. be about the same as a 12" shock with the spring set to the highest pos.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

      Comment

      • RichDesmond
        Forum Sage
        Past Site Supporter
        • Jul 2011
        • 2757
        • NoVa

        #4
        Slower steering, a tendency to push the front end when cornering hard, and less ground clearance will be the main side effects.
        If this is a cafe racer conversion mainly focused on looks then the tradeoffs may be ok for you. If you looking at actually riding it halfway hard, then it's a bad idea.
        Either way, the Ohlins seem a bit of a waste. Why not just sell them?
        '20 Ducati Multistrada 1260S, '93 Ducati 750SS, '01 SV650S, '07 DL650, '01 DR-Z400S, '80 GS1000S, '85 RZ350

        Comment

        Working...