Hi Rich, you are mentioned in a thread (link below) about installing Sonic springs on an 1100E with race tech emulators - which I'm doing. The quote is "10W oil, with the level set at 120mm as per Rich Desmond's instructions".
The Sonic instructions are not really clear to me, mentioning 20mm from the top of the tube with the stanchion compressed. 20mm? It seems too much. If it should be 120mm, that would be from top too, springs not in, and measured with stanchion all the way down?
https://www.thegsresources.com/_forum/forum/technical-forums/tires-suspension-brakes/81018-tuning-race-tech-emulators
​
The Sonic instructions are not really clear to me, mentioning 20mm from the top of the tube with the stanchion compressed. 20mm? It seems too much. If it should be 120mm, that would be from top too, springs not in, and measured with stanchion all the way down?
https://www.thegsresources.com/_forum/forum/technical-forums/tires-suspension-brakes/81018-tuning-race-tech-emulators
​