Hi all,
My GS750L apparently has 1983(?) GS1100E forks (dial on the bottom, with air valve in the middle). I unfortunately can't find a service...
13 results in 0.0057 seconds.
-
GS1100E Fork Oil Capacity
-
1979 GS750L Fork Seal Replacement
Hi all,
Question regarding fork seal replacement. I've seen people on the forum, and the BikeCliff guide, say they used a bike pump to pop... -
Fork Cap Removal
I feel like this is really easy but i can't figure out how to remove the end caps on the forks of my bike to add oil. Its an 83 GS 550L, heres a pict... -
GS1100ED is forked
Hello everyone,
First post to the board. I have an 83 GS1100E that I am restoring and have run into a problem with leaking forks. The... -
Rattle in 4th gear? Newbie
Hi, I'm new to the forum, I just bought a 1979 GS1000e. Its my first bike thats titled to me, but have been riding for a few years on my dad's '83 GS850.... -
1977 fork issues (inner tubes mainly)
After riding my GS750 to town on Monday I found out just how bad my front forks were so I decided to start taking them apart to replace the seals last... -
Fork springs for 82 GS850GL
Hi gang. My fork is quite a bit softer than I'd like, so I've been looking at possible solutions. The popular one seems to be to get the progressive... -
Fork bottom allen bolts won't come out!
I decided to try to hit these bolts with my impact wrench with the fork still assembled, as I've heard the spring tension might help undoing the bolt... -
Alternative fork guard?
I replaced my beat up old front fender today thanks to a new-used one from Blizzard (thanks buddy!!), and while doing this I couldn't help but notice... -
Spring suggestion: 92 kat 750 front on 78 1000E
Hi all,
I just picked up a kat chassis that I'm planning to use to upgrade the GS--initially just the frontend, and the rear wheel/brakes.... -
Fork Seals
Hello again,
I have another question for you guys. My forks are leaking pretty heavily now, so I have finally decided to replace my fork seals.... -
Need help!!! Asap
I have been fixing my 80 GS850G for 1.5 months was tightening everything before I took it for a test run. As I tightened the stud bolt on the front fork... -
Harrison Calipers for GS750T, new fork, braided lines
Hi,
I have read about Harrison Billet calipers, and would like to modify my '82 GS750T to accept them (does anyone have feedback on them?). The...Last edited by Guest; 06-18-2008, 03:47 PM.
