1st post with a new account, probably 3rd or 4th account I've had on here. Parked the bike about 2 years ago due to electrical issues.
Just put...
16 results in 0.0064 seconds.
-
81 gs650g rear master cylinder jammed
-
1981 GS850G Front Master Cylinder
Hey guys!
In the process of restoring a 1981 GS850G and it came with a shot front master cylinder and after trying to rebuild and the brittleness... -
Help identifying a master cylinder
My master cylinder started leaking, so I ordered an oem piston/cup set for my bike model (1982 GS 750T), but the new set was smaller than the one I removed... -
1982 gs750t master cylinder Rebuild or Replace?
I've finished my top end rebuild with the extra time I have with quarantine, but an engine is no good without any brakes. I took the master cylinder off... -
Master Cylinder Non-Rebuildable?
Hi All,
Bought an 81' 650g and am rebuilding the calipers and cylinders on the brakes and have come to a dead end and don't want to break... -
rear master cylinder
Hello, I have search around here and cant find anything that addresses my issue, so, I have rebuilt the rear master cylinder and calipers with K&l... -
Need new master cylinder for 83 GS1100E
Looking for a NOS or new replacement that looks similar to the stock piece..... Has to be black. Trying to keep the stock look as much as possible. Anyone...Last edited by Guest; 07-06-2015, 08:28 PM. -
Replacing the MC
Hi all,
My brakes are a mess. I took apart the original front MC and it wasn't in good shape. I decided to replace it entirely, as the... -
GS400 Front Brake Caliper Piston Size? And question?
Hey Guys,
I have a question I was I was hoping you could answer-- I recently purchased a replacement M/C brake lever unit with a 14mm... -
Brake relay switch and starter issue
Hey everyone, new rider and gsr member. I recently bought an 81 gs 450s that needed a new front master cylinder. I found a compatable aftermarket one... -
Broken master cylinder
So I was putting on my new clubman handlebars today and stupidly over-tightened the top screw on the master cylinder. I stripped the female part not the... -
New master cylinder for GS1000G
Has anyone successfully replaced the front master cylinder on a GS1000G with a newer generation one (or know of one that will suit)?
It would... -
Mystery of the Black Fingers
So this post will be a quick story to amuse, followed by my question. For those of you with limited time or limited patience for amusement, please feel... -
Whats inside my master cylinder?
I just opened the master cylinder up and it was pretty much bone dry. There is also a gunk kinda like Gum all on the bottom. Is there anything inside... -
Brake Help
Hi again,
First of all thanks again to everyone who has helped me in past threads. I finally got my 1980 GS850G on the road and it runs great....
