7 results in 0.0072 seconds.
-
Unusual carbon build-up?
I picked up a parts gs750t for the motor, and I was going to do a top-end refresh as it has 52k miles on it. Took the heads off and this is what I see:... -
Top end rebuild new cam chain noise?
Hey all,
I've been wrenching a lot on my 1982 gs750t during quarantine and completed a top end rebuild. Got it started and no leaks so far but there's... -
GS850 Head Gasket and Piston Ring Replacement
Hi Guys,
Just wanted to firstly say thanks for all your posts - this forum has been a blessing and a charm to read over the last year - Really... -
Need opinions and different perspectives on engine rebuild
I'm working on rebuilding the engine to a gs1100gk. Ran when I got it 2 years ago, limped it home (piston 4 was not firing). Finally getting around to... -
Investigating blown head gasket and leak at head bolt between center exhaust ports
82 GS750 T
I'm relatively new to wrenching but managed to resuscitate this bike after the previous owner had let it sit for 6 years outside. Rode... -
Burning Oil On Start-up - Valve Stem Seals
I believe my valve stems on my 81 GS1000GL have degraded. When I bought the bike a couple of years ago it would burn oil sometimes on startup after sitting... -
Top end rebuilt, now revs higher!!!??!!!
I have rebuilt the top end on a 81 GS750 DOHC. There are no leaks, I checked the timing before and after the cams were installed. I believe the choke,...
