Hi everyone,
I purchased a 1982 Gs650G 2 weeks ago with 12,000 miles in good running condition and am currently working on making sure everything...
18 results in 0.0076 seconds.
-
Valve clearance, Valve seats, small oil leak, low compression, please help.
-
81 gs850 valve clearance
Finally got my bike running after a carb rebuild and new intake boots. but once the bike is hot and i turn it off to restart it, it will not start back... -
Valve clearnce issue. Helpp
I'm working on a 1982 Suzuki gs1100l and I'm trying to check the valve clearence to see if they are withen spsc. But no matter where the cam position... -
Stiff valve tappet?
Hope you guys can help me out,
So I had my cams out today and was doing some work on my 1981 suzuki GS 650g and i noticed that one of my... -
Test valves for leakage?
I know I've seen it on here, but now I can't find it.
At least twice I have heard of the dirty way of checking the valve clearance by flipping... -
shim size all over the place.....
1982 gs1100 gk.
hadn't run for the first year i owned it while i was going through it.
I checked all the valve clearances and... -
1982 gs850 wont rev past 5.5k rpms when in gear
Hey guys just finally rebuilt my old 1982 gs850l shes a beaut. she runs great but the only problem i have left is, when i romp on the throttle and try... -
Strange valve color
Hello :-)
I took apart my cylinder on my GS450.
I found that one of the four valves has an odd brown color.
I am not sure why this... -
need advice on no start
Ok so i have a 1978 gs750 and i always had trouble on cold starts i would sometimes have to catch it in gear but after she was warmed up she was good....ive... -
Gasket pieces fell into cam chain area!
This afternoon I took the valve cover off my 1980 850G for the first time in 20 years. The gasket was in pretty bad shape. The areas where it was leaking... -
81 GS650G Head tapping when warm
My 650 has a tapping noise in the head from what sounds like cylinder 3, but only when the engine is being restarted from a warm condition and it only... -
Checking Valve Clearances
Hi all,
Following some study on how to do this I have come across 4 different methods from credible sources. On this forum there has been... -
Fuel Valves & Petcock
These questions pertain to my 1980 GS850GL
1. Does anyone have or know an inexpensive source for carburetor float valves AKA needle and... -
Valve tapping noise (video)
I have what I think is a valve that is tapping and requires the shims to be changed. Can someone with more experience look at the video here of my GS1000G... -
Oh boy, I did I mess up my valve adjustment.
After fiddling with the bike for about two months now, following this forum's recommendations on how to get a bike running nicely and safely. I finally...
