1981 GS1100e - Using a 2006 GSX6 Left Handel Switch.

[c&c]

Hi guys!

My original left handle bar switch is beyond repair.

As a replacement I bought a 2006 GSXR Left handlebar switch.

Does anybody have list of the wires coming out of the turn single control box and there function? If a list is alredy avalable it would be of great help and time saving information.

I will also install a hazard circuit once I figure out what wires do what.

The original turn single switch has 7 wires and the GSXR switch has 3.

Does any body knoy if the 1981 GS1100E have the self canceling option?
I have the Haynes manual but it is lacking that information.

Any help will be appreciated.

Thank you.

 

[norman1950]

http://www.google.com/imgres?imgurl...14HgDw&sqi=2&ved=0CC8Q9QEwAA&dur=286#imgdii=_

Here it a wire diagram, the switch is in the bottom left...

 

[c&c]

Thanks for the image.
I should have been more specific.
I'm looking for the 1981 GS1100e "turn signle control unit" wire/function list.
If one exists. and if one does not exist then I will have to figure them out.

That way I can figure out if I can adapt my 2006 gsxr handlebar switch or if I have to look for maybe an aftermarket control unit.

There are 3 wires coming out of the gsx turn signal switch vs 7 from the 1981 GS1100 turn signal switch. See attached image

http://www.mtsac.edu/~cliff/storage...1_Wiring_Diagram_Colour_with_light_switch.jpg

 

[Hone101]

I did something similar with both my left and right switches. You'll have to wire your headlight permanently on with the key or put a switch somewhere. I just wired mine up with they key and have had no problems. If no one comes along I can tell you what I wired to what tomorrow.

 

[Steve]

Thanks for the image.
I should have been more specific.
I'm looking for the 1981 GS1100e "turn signle control unit" wire/function list.
...

See attached image

http://www.mtsac.edu/~cliff/storage...1_Wiring_Diagram_Colour_with_light_switch.jpg

Believe it or not, you answered your own question. :-k

Look in the lower right corner of your image. You will see a numbered list of devices, and should see that #8 is the "Turn Signal Control Unit".

Look just to the left of that list, you will see item #8.

.

 

[c&c]

I did something similar with both my left and right switches. You'll have to wire your headlight permanently on with the key or put a switch somewhere. I just wired mine up with they key and have had no problems. If no one comes along I can tell you what I wired to what tomorrow.

Excellent and thank you!

 

[Guest]

http://www.google.com/imgres?imgurl=http://www.gixxer.com/photopost/data/500/GSX-R_600_K2_Wiring_Diagram.jpg&imgrefurl=http://www.gixxer.com/forums/showthread.php?t%3D247186&h=1858&w=2500&sz=677&tbnid=koEwmC1Z7_9hvM:&tbnh=82&tbnw=110&zoom=1&usg=__k2nZbeR7P1pGt8gfTRKqEMw8LI4=&docid=TuLLdFKVtBZiFM&sa=X&ei=q1HlUbf5GumCygGt14HgDw&sqi=2&ved=0CC8Q9QEwAA&dur=286#imgdii=_

Here it a wire diagram, the switch is in the bottom left...

Good god....what a diagram.

"Does any body knoy if the 1981 GS1100E have the self canceling option?" No, it did not.

 

[c&c]

Good god....what a diagram.

"Does any body knoy if the 1981 GS1100E have the self canceling option?" No, it did not.

Thanks for the answer. !

 

[Kaiser Sosei]

Good god....what a diagram.

"Does any body knoy if the 1981 GS1100E have the self canceling option?" No, it did not.

I don't think that is correct. I am fairly sure the '81 did have it.

 

[c&c]

Got it working using this http://blog.suzuki-katana.com/?p=505

Without his image I would have never guessed that the light green/back and brown/yellow had to be together to make the turn signal controller work.

The hazard work but not the way they should.

The passing lights work.


There is a difference in wires size. The GS are bigger then the GSXR600.
Do you think that is why the from flashers are dimmer then with the old control.

when I cut the GS wires to solder them with the GSXR I noticed that some of them where oxidized even if the sleeve was not damaged. Is that normal and will I have to change the wires?

 

[ScottEslick]

Did this work out