Bike revvs high after I let go of the throttle, dies after

[djg42]

I just got another GS450. It has emgo pods which IT wasnt jetted for so I decided to put the airbox from my old GS450 and make this one stock.
Now that i have everything back on its hard to start, dies as soon as I let of the throttle, and the revvs stay high for about 3-5 seconds after i let of the throttle when in neutral.

To put the airbox on I needed to take out the camshaft tensioner, did i mess sonething up putting it back on, could that be responsible? I tried pushing the slides up to see if they are returning normally and they seem to. Theres no backfire or popping.

Any ideas would be greatly appreciated! Thanks,
DG

 

[Macmatic]

Was it running with the pods? The way you describe it revving up and then dying out sounds like bad intake boot o-rings to me but I'm sure someone else will have other ideas. Could be that the stock airbox and filter are creating more vacuum and sucking more un-metered are past the boots if the o-rings are shot.

/\/\ac

 

[djg42]

smart, i bet thats it. I had to take the intake boots out to get the airbox in, and screwing the intake boots is really hard to do with the airbox in-theres hardly any room. Im gonna try to tighten those screws down and see if that will do the trick.
Thanks!