Confused over Dyna coils and spark plugs

[trintek]

true, most noise i had was while using the cigarette adapter and rubber duck antenna. the sent audio was fine regardless of being plugged in or not, and received audio was fine when using the battery pack. as this was on a vw and a jeep cherokee that were both running modified ignition systems, i suspect it was just the usual electrical interference speaker noise (high to higher pitch whining depending on rpm). of course the old hotwater 202's were great for modding, but imo were lacking in other areas.

the antenna i used on the vehicles were a pvc encapsulated copper tube slim jim and same materials 1/4 wave j-pole.

btw, nice to see another radio op

if you are ever in the terlingua/big bend area, hit the repeaters. kb5rob always has his on as does n1vzl, mine is kb5kou (for some reason still not showing as tech class, need to call them and sort that out).

 

[Steve]

I was really looking for nice yellow Accel 8mm copper core wires, but nobody around here carries them or had even seen them for years.

I have some yellow Accel graphite core suppressor wires that I took off one of the bikes I got.

You want them? You can have them.

They are complete with the right-angle boots for the coils and straight boots for the plugs.

.

 

[Turtleface]

Z1 also has some Dyna yellow suppression 7 m.m.s. Ordered a set with my new coils and plugs yesterday. Hopefully they'll get here about the same time as my stator, R/R, fork rebuild, POR-15. Next weekend's looking full.

Here's a link to the Z1 wires, they're gawdawful hard to find one their site. http://www.z1enterprises.com/detail.aspx?ID=207