Grrrr 82 GS850GL no sparky

[Harry P.]

Hello again all.

Just did the coil relay mod and thought I did it correct, kill switch is triggering the relay, measuring 12V+ at the coils but when I went to start it she turns over but would not start, pulled a wire and put a used plug in it, no spark.

Where could I have gone wrong? For something that looks so easy I am having a difficult time figuring it out, wiring is not my strong suit, but I can follow directions pretty well....hint hint.

Next stop may be a shotgun party and a donation to the reef.

 

[BassCliff]

Hi,

Coil Relay Modification
(by Mr. oldryder and Mr. Matchless)

More On Coil Relay Modification


Thank you for your indulgence,

BassCliff

 

[Harry P.]

Thanks Basscliff, I think have it all done right as shown, except for the 2nd wire going to the kill switch, if i connect both my kill will not work and I still do not have spark. Me thinks the PO has something in the harness amiss.

 

[Harry P.]

What would cause me to have 12V at the coils and no spark at the plug? Something with the igniter? What should I look for?

 

[Harry P.]

Thanks to the overwhelming response I was forced to figure it out, lol. Dumb me did not have the O/W from the ignitor hooked up properly. Did that and YIPPEE it started right up, still will not get past a 1/4 throttle. Could my pilots be to small? Topic for another forum. Electric is OK, I'm out. Thanks all.