GS1100E restomod project

[Guest]

I started taking the bandit apart last week. Got rear sets off and determined I can use them on the gs and shift splines are the same so that’s pretty easy. started loosening everything on the back wheel and swingarm to remove it. luckily this bike must have only had one tire put on it and only the chain adjusted because all the hardware is in good shape and even though it’s corroded everything has come apart easy so that’s good.


having a hard time working on it since I’m still recovering from a femur fracture and broken arm so I can barely walk.

 

[Guest]

so got more of the bandit apart, rear end is off and whole front end off. Checking steering stems I see the bandit is tapered on the bottom and the rf900 isn’t. i thought I read that these bearings are interchangeable? Or was that rf900 to gs1100 they are Interchangeable?

bandit on left and rf900 on the right with bandit top clamp say on top

 

[Guest]

 

[hillsy]

All 3 should be 30mm ID for the bottom bearing - looks to me like the RF stem has been changed out for a 25mm one? Either that's a spacer in there or the stem has been machined down??

 

[Guest]

That would be my luck it’s machined down. I’ll have to cross reference pictures.

 

[Guest]

All 3 should be 30mm ID for the bottom bearing - looks to me like the RF stem has been changed out for a 25mm one? Either that's a spacer in there or the stem has been machined down??

just looked on eBay and they all look like the bandit one. man that sucks what are the chances I but a machined down one. oh well they are like $25 guess I’ll get another one.