Mini Throttle Housing

[Macguyver]

Good morning guys,
I have been searching for two days trying to find a thread which had a link to a replacement throttle housing for 7/8" bars. It was a mini style with only the throttle assembly with no kill switch/start button.

I know it was posted not too long ago, but for the life of me I can't seem to find it. Can anyone help please? It is to replace the stock one on my 1981 GS650G since I am moving the start/run stuff.

 

[mriddle]

http://www.motocross-parts-site.com/pushpull-throttle-assembly-mikuni-racing-carbs-p-156.html


Could you use something like this ?

 

[Theo]

I'm in the same boat as you since I will be using custom switches. From my searching I found a few that I think will work

http://cgi.ebay.com/ebaymotors/TRIU...rcycles_Parts_Accessories?hash=item3a57f4609f

http://cgi.ebay.com/ebaymotors/7-8-...rcycles_Parts_Accessories?hash=item20af5cdfa3

http://www.crc2onlinecatalog.com/chopper.htm (scroll down to the bottom of the page)

 

[tejasmud]

Those don't look too bad Theo.

First 2 links look to be pull throttle.

The first link mriddle posted is push pull, similar to the third link, which both look like Motion Pro.

Here is one, but not sure the tube ID.

http://www.denniskirk.com/jsp/tpl/p...=11510&skuId=1904408&productId=p1904408&mmyId=

 

[Macguyver]

Outstanding!

Outstanding!

Thanks guys for the quick replies!
I think the black nylon one will do the trick nicely!

Now I can rest easy knowing that is one less part I need to source.
Thanks again!