G
Guest
Guest
Ok its on a 1980 GS1000. Im trying to hook everything back up on the bike I just got. Ive got a wiring diagram from bikecliff's website. The wire is Green with a white tracer and it is down near the battery, voltage reg. and all that stuff. On the diagram the only Green/white wire i see shows it hooking to the red/white wire going to the regulator. Only problem is it doesnt show the red/white wire hooking to the regulator and I have one hooked to it from the harness. Now there is a little note on there that says *modification but I dont know what the purpose is or if its even relate to what im trying to figure as it doesnt specify what is modified
I hope that was written clear enough