• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

side cover fabrication

  • Thread starter Thread starter refeicul
  • Start date Start date
R

refeicul

Guest
ok i saw on basscliffs site a thing about making side covers anyone have any luck doing this?

and about the "fixing pin" i think that design is why some of us are replacing them.. why not a screw or bolt to lock things in place?
 
Hi,

The author of that guide obviously had good luck fabricating his own sidecover. You just need the necessary skill (or lots of practice), tools, and materials. ;)

As for the "fixing pin", here's another tidbit from my website that you may find handy:

http://www.maxim-x.com/seca/sidecover/ - Repair the broken posts on your sidecovers.

There have been several threads here about riders who make their own fiberglass cafe seats, seat pans, and such. It's certainly do-able.
nod.gif



If you try it, please take lots of pictures for show and tell.
take_picture.gif




Thank you for your indulgence,

BassCliff


Thank you for your indulgence,

BassCliff
 
thanx cliff

i think i saw that fix awhile back just forgot about it, and where to find it.

On some of my covers i have plane snapped them in half (by accident):(
Or snapped off the lower part and had the post and part of the cover still on the bike. They need to be replaced and was looking into cheaper methods than just buying new ones:eek:

thanks again ill keep poking about
 
The side covers and their attaching "pins" are ABS plastic which is easy to repair with a "slurry" made of some ABS shavings or scrap pieces melted in acetone. The slurry acts like a glue but actual melts into the plastic of the whatever you are repairing and becomes molecularly connected with the repaired pieces making them again all one piece. When cured it can be shaped like any piece of ABS.

On the subject of forming new side covers or other pieces, ABS plastic is thermo formable meaning it can be formed into shape using heat. The original parts are made this way when a sheet of ABS is heated and then vacuum formed over a "buck".

I have made side covers in much the same way using a technique called "drape forming". You first make a buck to form over. This is usually formed in wood and is shaped to as closely as possible resemble the cover you are making. You would need to make one for each side if making two. Once the form is shaped and smoothed to your liking then you would apply your heated sheet of ABS and gently help it in to position with gloved hands and wooden shapers (like paint stir sticks). While warm and soft it will drape over the buck and take the shape. Once cooled you would make your attaching pins from more abs stock and slurry.

You can obtain ABS sheet from any company selling plastic products usually to industry. Your local automotive paint guys likely would have a line on such a company or you'll find listings in the yellow pages. Sheets are usually sold in thicknesses from 3mm and up and 4' x8' and coloured white or black. You likely only need a half sheet or less and they may even have cut offs.The thinner the material the easier to work so 3 mm would be the best.

The ABS is easy to work with and only needs to get to a little over 100 deg. to get soft. You can heat it in the oven but keep a close eye on it as it will melt buble and burn if left too long or gets too hot. You will need good gloves to handle it and not burn yourself. It does cool very quickly and will harden into any shape its left at so when working with it, I use an electric paint removal gun to keep it soft and pliable. Be gently with the shaping especially when using sticks to help form as they can dent the soft surface.

As Cliff mentions, projects of this type take a little bit of practice and some skill but are doable by most folks with a little preparation and patience.

I regret that I don't have any pics to share on this and i hope you can picture what I described. If you want any more info please p.m. me. Also have a look at Matchless' Windjammer project as he details the making and usage of the ABS slurry and how well it can connect pieces together.

Good luck.
Cheers,
Spyug
 
Last edited:
i just used what was most readily available to me. Fiberglass resin and mats are available everywhere and takes a little patience to use. that might be good to try later if i want a more OEM look. if i get ambitious i may keep that in mind if i want to try and make it a full dresser! the reason i made them is when i moved my side covers went missing so there was nothing to repair and i dident just wanna take the ones of the 1000 and tracking down ok used ones wasent easy lastly the new ones are expencive

sspx1509.jpg



 
Last edited:
I think they look great. :clap: How are they structurally? Do they seem to flex alot? I was just wondering how many layers of the mat you did. :-k
 
Those turned out very well. Good job sir!

You are probably correct in that the materials for glassing are readily available and it is not too difficult a chore if you take the time to prepare a good buck. However, as I find glassing messy and somewhat fiddly, I try to do as much as I can with the ABS. To really do ABS well, you need a vacuum table to suck the warmed plastic over the buck. You can then create much finer definition in your parts. I have toyed with a vacuum table but haven't yet been able to find a vacuum pump at a decent price. Maybe someday.

Now lets see how they look with a bit of paint on them.

Cheers,
Spyug
 
You must log in or register to reply here.
Back
Top