GS250T Carb Question
Collapse
X
-
GS250T Carb Question
Greetings All. I can't figure out what these two slotted screws are on the Mikuni carbs for my 1980 GS250T. They don't screw all the way out for some reason so I'm wondering what their function is. The fuel/air mixture screws on these carbs are capped at the factory aned are located in a different area. They might have something to do with balancing since they sit right above the intake ports. The carb diagram on the parts fiche doesn't show any part number for these. Thoughts? Thanks.Tags: None -
Those ARE the idle mix screws. By the way, "technical discussions" of twins have their own section. In this section's header, it does say
"Technical questions are not to be posted here." But it's easy to miss...If your thread has too much life, I think you can move it there. -
dmoore
Ooop.s Thanks.Greetings All. I can't figure out what these two slotted screws are on the Mikuni carbs for my 1980 GS250T. They don't screw all the way out for some reason so I'm wondering what their function is. The fuel/air mixture screws on these carbs are capped at the factory aned are located in a different area. They might have something to do with balancing since they sit right above the intake ports. The carb diagram on the parts fiche doesn't show any part number for these. Thoughts? Thanks.Comment
Comment