CB 650 project

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #61


    Got the fairing on last night and today it started and ran for a few then had some electrical gremlins reappear. Grr Hondas

    Comment

    • Guest

      #62


      Gas cap repainted.

      Comment

      • Guest

        #63


        The locking cover thing polished up nicely.

        Comment

        • Guest

          #64


          Taillights and signals all wired in with a disconnect. Waiting on all new carb jets stock low speed jets just not enough, and it had three 122 mains and one 125. Just the carb sorting out left and this should be done soon.

          Comment

          • Guest

            #65


            So I got new jets for the carbs found some bowl screws had the threads stripped out and someone attempted a repair . It ran good but leaked fuel so off to eBay searching for another set. Found some he had to bid all the way up to $122 but we got them today. Good news all the treads are excellent. Bad news you can see how bad the inside were. A before and after pic. Now once I get them back together can't finish them till new bowl orings show up.

            Comment

            • spyug

              #66
              Oh that is a messy carb. Haven't seen one that bad for awhile. Now the stripped out carb threads is a common Honda issue I am finding and I'm experiencing it myself on two carbs. I am contemplating trying Alumiweld to fill the holes then retap them but I don't know if it will bond with the casting metal. Worth a try I guess.

              I have been trying to resource a new rack of carbs for a few weeks now but no luck so far. And being basically "frugal" I could pay $122 for a rack but not for one carb.

              This has held me up and I'm stalled until I can get this sorted.

              Looks like you are almost done and it looks really good. The owner must be really happy and eager to get blasting around.

              Can't wait to see her all done and buttoned up.

              Cheers.

              Comment

              • Guest

                #67
                We did get the whole each for $122. Yes both of us are getting excited about getting it done and ridding it.

                Comment

                • Crankthat

                  #68
                  Looking great!

                  Comment

                  • chuck hahn
                    Forum LongTimer
                    Past Site Supporter
                    • May 2009
                    • 25918
                    • Norman, Oklahoma

                    #69
                    These are off my 76 KZ650 B1 project when I got it.....

                    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                    Comment

                    • Guest

                      #70
                      Gotta love that roting gas smell.lol

                      Comment

                      • Guest

                        #71


                        Got the float bowl orings today and yes the carbs have no leaks finally. Buttoned up most of the loose ends today. Got it turned so I could put the hrc sticker on left rear and get a look at that side from more than 2' away. Tomorrow's plan is to ride it.

                        Comment

                        • Guest

                          #72


                          The Honda is finally gone home. After being basically done in June carb issues, gearing all wrong, mirror change , schedule clashing have delayed him taking it home but today it happened. And he brought me one of his other bikes for some maintenance, its a GS so I'll start a GS project thread with a picture

                          Comment

                          • Jedz123
                            Forum Guru
                            Past Site Supporter
                            • Jul 2009
                            • 5685
                            • Centeral, Vermont

                            #73
                            OMG... Fantastic JOB!!!

                            Comment

                            Working...