Clutch Cable Routing - Is THIS ok?!

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Showdown
    #16
    I'm counting the gap created between the lever and the perch made with a super light squeeze of the lever...

      Comment

      • Guest
        #17
        According to the manual that's the right place to check the freeplay...

          Comment

          • Steve
            GS Whisperer
            • Jun 2005
            • 35927
            • southwest oHIo
            #18
            Originally posted by pete
            According to the manual that's the right place to check the freeplay...
            True, right place, but his measurement is about double what it should be.

            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

              Comment

              • Guest
                #19
                Originally posted by Steve
                True, right place, but his measurement is about double what it should be.

                .
                Cool, I'm drawing a complete blank on the spec at the moment and haven't been in the garage to check...

                  Comment

                  • Steve
                    GS Whisperer
                    • Jun 2005
                    • 35927
                    • southwest oHIo
                    #20
                    Originally posted by pete
                    Cool, I'm drawing a complete blank on the spec at the moment and haven't been in the garage to check...
                    I don't have a manual in front of me, but I seem to remember most specs calling for 2-3mm of play.

                    .
                    sigpic
                    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                    #2 son: 1980 GS1000G
                    Family Portrait
                    Siblings and Spouses
                    Mom's first ride
                    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                    (Click on my username in the upper-left corner for e-mail info.)

                      Comment

                      • Guest
                        #21
                        Originally posted by Steve
                        I don't have a manual in front of me, but I seem to remember most specs calling for 2-3mm of play.

                        .
                        I was thinking 4mm for some reason... but I'm sure we're close enough... 1/4" is a touch over 6mm give or take so not too far away I wouldn't think...

                          Comment

                          Previous 1 2 template Next
                          Working...