Clutch Cable Routing - Is THIS ok?!

[Showdown]

I'm counting the gap created between the lever and the perch made with a super light squeeze of the lever...

[pete]

According to the manual that's the right place to check the freeplay...

[Steve]

According to the manual that's the right place to check the freeplay...

True, right place, but his measurement is about double what it should be.

.

[pete]

True, right place, but his measurement is about double what it should be.

.

Cool, I'm drawing a complete blank on the spec at the moment and haven't been in the garage to check...

[Steve]

Cool, I'm drawing a complete blank on the spec at the moment and haven't been in the garage to check...

I don't have a manual in front of me, but I seem to remember most specs calling for 2-3mm of play.

.

[pete]

I don't have a manual in front of me, but I seem to remember most specs calling for 2-3mm of play.

.

I was thinking 4mm for some reason... but I'm sure we're close enough... 1/4" is a touch over 6mm give or take so not too far away I wouldn't think...