He took it apart to fix a false neutral between 5th and 6th, said he looked at the shift forks which were fine and gave up. I was looking at the gears on the countershaft, (or maybe it was the mainshaft) the sliding gear for 6th wobbles on the shaft, you can pull it to the side about 1/4 inch. It's like the bearing where it runs on the shaft is worn out, you can actually twist it on the shaft. I'm thinking this is enough to make the dogs engage funny. The dogs themselves look fine at first glance.
12,000 miles on it all if that matters.
Might just find a used engine, that wai I can be riding in a few days, or maybe find a used transmission, i'd rather do that from someone here so the parts are more likely to be good.
Other than that, it looks ready to ride. Brakes are fine, bearings seem tight, new tires, it's all good.
Any other ideas? Any transmission experts here?
And, while I'm in there, what's the hot setup, 850 pistons or something?
Thanks for any ideas guys!



Comment