clutchpack thickness clutch release maxed out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • petrolhead
    Forum Apprentice
    • Sep 2015
    • 75
    • Amsterdam

    #1

    clutchpack thickness clutch release maxed out

    After installing a Vesrah clutch pack on my 750 8V the clutch release bolt has to be turned in so far the nut baraly fits on.
    I could try and slip the clutch a lot to thin the plates ;-)
    Anyone has the same experience with fat clutch plates ?
    Under no circumstances should both hands be removed from handlebars.
    (1977 owners manual)
  • Cipher
    Forum Sage
    • Mar 2016
    • 3129
    • Toronto Ontario

    #2
    https://gsarchive.bwringer.com/mtsac...arly8valve.pdf
    pg 79

    there's an oem thickness check pg 34
    Last edited by Cipher; 11-03-2022, 08:54 AM.
    1983 GS 550 LD
    2009 BMW K1300s

    Comment

    • zed1015
      Forum Mentor
      • Oct 2020
      • 411
      • North Lincolnshire - UK .

      #3
      Sounds more like the clutch actuator is in the wrong position, the thrust bearing has been left out or similar.
      Mikuni Viton Choke Plunger Seat Renewal.
      VITON Choke plunger seals .KAWASAKI Z1,Z900,Z650,Z1000,Z1R,SUZUKI GS1000,GSXR,RF | eBay

      Air Corrector Jets for Mikuni VM 24, 26 and 28mm carbs .
      https://www.ebay.co.uk/itm/254380193...84.m1555.l2649



      sigpic

      Comment

      • petrolhead
        Forum Apprentice
        • Sep 2015
        • 75
        • Amsterdam

        #4
        Thanks Cipher and Zed !
        I will check both.
        Under no circumstances should both hands be removed from handlebars.
        (1977 owners manual)

        Comment

        Working...