Announcement

Collapse
No announcement yet.

Rebuild and running with no C/S cover

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rebuild and running with no C/S cover

    I am impatient and want to fire up my new to me 1978 GS7 750/850 2V motor, is there any reason why I couldn't run it with no counter shaft cover? I would leave the clutch pushrod in place and fire it on the stand for only a few minutes. The countershaft sprocket cover is unavailable right now otherwise I wouldn't ask this question.

    #2
    cant see any reason why not. go for it
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment


      #3
      Just don't try to ride it without it in place.
      Unless you have no further use for your left foot and can do without it.

      Eric

      Comment


        #4
        Its not quite ready to ride, I just want to hear it run and check for leaks before I continue bolting it together. Thanks for the info I didnt see any reason it would hurt either. Eric, I have plenty of uses for my left foot. I just cant think of any right now other than it keeps me from falling over.....

        Comment

        Working...
        X