82-1100e bolt found in sprocket case.

[Gregory]

Get one of those banjo bolt pressure switches, I replaced both of my brake mechanical switches with those, works pretty sweet.l.

Hi Bill, I got on ebay and dennis kirk, I see more than one size offered... do you have any idea what size the gs1100 front master cylinder banjo is?

[Gregory]

I think this thread is done since it has gone so far from the sprocket issue (my fault).

I did sort out the petcock--- the PO had the spring on the wrong side of the diaphragm.

Banjo bolt size solved - 10mm

Idle knob located and turned down, stumbles but determined it is sucking air causing LEAN condition and stumbling at low idle (on another thread now)

Thread Completed

- Thanks everyone for the help, what a great group of people.