I’m looking to reinstall the seat cover on my GS750 that I installed a few years ago. I’ve never been particularly happy with the way the installation job looked so it’s time to give it another go. The piece of rubber that kept the edge of the seat pan from ripping the bottom of the seat cover disintegrated so I would like to replace it while I’m there. Does anybody have any substitutes that they’ve used successfully? I saw some small rubber u-channel trim on Amazon but I’m concerned that it might create a bulge around the bottom of the seat pan.
-
-
This is the type of stuff you need.
Mikuni Viton Choke Plunger Seat Renewal.
VITON Choke plunger seals .KAWASAKI Z1,Z900,Z650,Z1000,Z1R,SUZUKI GS1000,GSXR,RF | eBay
Air Corrector Jets for Mikuni VM 24, 26 and 28mm carbs .
https://www.ebay.co.uk/itm/254380193...84.m1555.l2649
sigpic -
Gorilla tape does wonders.The above source does ship to the US, Type in rubber u channel on ebay and many variations pop upLast edited by chuck hahn; 09-01-2022, 06:16 AM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Thanks for the suggestions fellas!Comment
-
I wrapped some 1/4 foam around the edge. Worked great, but I don't know how it will hold up long term, but I'm optimistic.1979 GS850 G
1979 GS1000E Resto moded
1993 Kawasaki ZR1100
The most effective means of preventing tyranny is to illuminate, as far as practicable, the minds of the people at large, and more especially to give them knowledge of those facts. - Thomas JeffersonComment
Comment