Post a picture of your custom GS

[jwhelan65]

My 82 1100 Katana

Welcome L7!! VJMoto on FB

[Crow]

Yeah Crow, spill the beans! I remember you asked me about my rear wheel, but I'm curious as to what exactly you're up to.....

Haha, well its 450S with a 94? gsxr750 front end and a FZR400/Bandit400/GS500 rear end. I followed your ingenious bandit400/gs500 wheel and brake conversion and I am attempting to modify an FZR400 swing arm. I chose the fzr swing arm because it was 1.aluminum and only 0.5" wider at the pivot width.
2.just slightly longer (maybe 1.5-2" longer) allowing chain adjustment while keeping roughly the same wheel base. It looks horribly stretched in the photo because its not sitting "in" the frame and is pushed back several inches.
3.the "arms" line up nicely with the rear shocks (at least by eye so far) and a 150 tire fits quite nicely. Any bigger than 150 and I believe the chain will scrub.

That's some serious rubber for a 450! Got a build/project thread somewhere?

No sorry. I've thought about starting one here but progress is so slow and the only major modification so far worth mentioning is Big Rich's rear wheel/brake conversion which he has already gone over extensively. However, I am taking pictures so maybe if I ever make some timely progress I'll start one.

[Big Rich]

Well sir, my hat is off to you. Looks like it's coming along rather well. Good info about the FZR swingarm too! Be sure to document that part and post it too - there has been a little talk here and there about different swingers for the 450, but nothing documented very well (IIRC).

[trevor]

Well I guess my 1100 might qualify now...
I bought the bike pretty close to stock..this is what I have done so far...

Superbike bars
SS braided lines
Lockhart oil cooler
Powder coated rims
V&H 4-1
dyno stage 1 jet kit
Marzocchi rear shocks
Sonic fork springs
Perilli Sport Demons

[Guest]

Niceeeee......you know what it needs though, a MotoGP works exhaust and some Mikuni 36 smoothbores

[trevor]

Niceeeee......you know what it needs though, a MotoGP works exhaust and some Mikuni 36 smoothbores

Lol...I'm going to kill you!!! Give me the $500 will ya?

[Guest]

Lol...I'm going to kill you!!! Give me the $500 will ya?

$500?? You need a $1000, ha,ha,ha

[trevor]

$500?? You need a $1000, ha,ha,ha

Maybe I should sell the dirt bike?

[kimjay]

Here is my 77gs 550 brafe

[glib]

Well I guess my 1100 might qualify now...
I bought the bike pretty close to stock..this is what I have done so far...

Beautiful. What size are the tires?

[markisthestig]

[cowboyup3371]

It looks clean but did you fix those lean cylinders yet?

[trevor]

It looks clean but did you fix those lean cylinders yet?

Are talking to me cowboy? That was fixed last summer with proper jetting. And for good measure added the cooler. 😃

[markisthestig]

next day of i'm planning on checking out the carbs to verify if it has been re-jetted for the pods and 4-1 exhaust. also went ahead and ordered o-rings to install just in case while I'm at it.

[Agemax]