Post a picture of your custom GS

[Guest]

My 82 Kat

Pontiac, that bike GORGEOUS.

[Guest]

Yours is one of them.

I also have an '82 1100e with an oil cooler. I can't tell from the pic, don't your oil cooler lines go straight down to the two bolts on the sides of the oil filter over?

Thanks, Rob.

Yes, the lines do go straight down to the oil filter cover (an 1150 cover). I am going to get slightly longer lines and run them behind the cooler, or I may try to get an adapter to run them back to the port on the back of the motor where the oil pressure switch & temp sensor are located.

[Guest]

My 82 Kat

Love the spokes !

[Scratcher09]

image.jpg
Here's recently completed '82 GS1100.

[Guest]

[ATTACH=CONFIG]37614[/ATTACH]
Here's recently completed '82 GS1100.

that has got to be the nicest modded 1100G I've seen yet. I followed your rebuild on that one, some very nice attention to details. Well done indeed sir, congratulations.

[Charlie G]

This is a nicely done bike.

cg

[gustovh]

Yes it is, how you doing Charlie?

V

[russr33]

Wow this bike is gorgeous.

Just seeing this. Thanks!

[KEITH KRAUSE]

Good looking bike. Personal.

[fer_gloko]

Well I guess my 1100 might qualify now...
I bought the bike pretty close to stock..this is what I have done so far...

Superbike bars
SS braided lines
Lockhart oil cooler
Powder coated rims
V&H 4-1
dyno stage 1 jet kit
Marzocchi rear shocks
Sonic fork springs
Perilli Sport Demons

is that a stock front fender? I've recently purchased a 1980 GS850G and it came with that fender. a lot of people have been asking me where i got it IMG_3836.jpg

[ShadowFocus603]

It's the stock fender for the 1100E in 82 and 83. Follow my Dahlia build for a look at a stock 850G fender. Not sure of fork spacing and mounting holes but if you have that fender you *might have an 1100E front end on it. Could be an upgrade, could be an accident repair. BTW you attachment is broken.

[Tuner Auto]

Thats Awesome !
I have thought of doing something very similar in th past . How did you get the stickers to not fold or warp when wrapping around the round portions ? Heat Gun ?

Its a bunch of vinyl Obey stickers I used to cover them with then I clear coated them.

[sachsaca]

Dirty, rotten, wicked, mean, and nasty, I like it...

[KEITH KRAUSE]

Very unique! Thanks for sharing.

[08rangerdan]