Post a picture of your custom GS

[bigal]

my 79 gs-850

im normally into large custom cruiser bikes / chops etc , but i picked up this 79 gs-850 not so long ago and cleaned it up , done some repairs and mot'd it and i have to admit that im very impressed with it , it handles great , its smoothe , reliable and looks good too.


powdercoated frame, matching wheels, engine bars, s/s brake lines, harris 4 into 1 exhaust , new tyres and all new seals and its now in daily use .

[MakDad]

NO, this is NOT my bike...but this thing is SICK (in a good way) !!!!

Surfing the web , I stumbled upon this bike a guy made in europe. To tell you the truth, my pants were wet after I saw it.

If anyone knows where I can find the same exact seat he's got, please let me know.

[Guest]

Surfing the web , I stumbled upon this bike a guy made in europe. To tell you the truth, my pants were wet after I saw it.

If anyone knows where I can find the same exact seat he's got, please let me know.

[ATTACH]8387[/ATTACH]

I posted that one a while back, very nice bike.

http://www.thegsresources.com/_forum/showthread.php?t=150746&highlight=pic

[cyclefvr2]

Sorry That wont work; saying it is red but no new photo. Get to work posting that new pic .

The exhaust looks great; Did the can just slip onto the mid pipe?

thats a factory exh off a stock bike isnt it?? im guessing because of the tight clearences, looks nice whats it off of?

pretty bad v&h /muzzy ect... couldnt put 2x2 together and make a better product, most aftermarket headders are dented because there made with pipes stacked instead of side beside

[Loose Seal]

Haven’t posted here in forever…

I parked the bike for the season last week which means time to continue my idea of improvements. Biggest things on my list is the seat and rearsets. I chopped off all the mounting tabs and mocked up the new seat, now I just need to shorten the frame a bit, box it and make new mounts. I could never decide on a café type fiberglass seat. This ‘70s Suzuki flat seat ended up being exactly what I wanted but never thought I’d find. It’s literally like new and I paid all of $20 for it.



I’ll probably make my own LED taillight or modify something premade with additional LEDs. I want it bright, very bright.

[Gumbo76]

Try these guys.

Surfing the web , I stumbled upon this bike a guy made in europe. To tell you the truth, my pants were wet after I saw it.

If anyone knows where I can find the same exact seat he's got, please let me know.

[ATTACH]8387[/ATTACH]

I got my seat from these guys! Hotwing Glass. Good quality Fiberglass. This particular seat looks VERY close. It's the same style. They have a few options.

http://www.hotwingglass.com/seats/road-race-1.shtml

The bates2 seat here could also be a very good match!

http://www.airtech-streamlining.com/vintage/vintageseats_round.htm

Good luck!

[Colin Green]

Haven’t posted here in forever…

I parked the bike for the season last week which means time to continue my idea of improvements. Biggest things on my list is the seat and rearsets. I chopped off all the mounting tabs and mocked up the new seat, now I just need to shorten the frame a bit, box it and make new mounts. I could never decide on a café type fiberglass seat. This ‘70s Suzuki flat seat ended up being exactly what I wanted but never thought I’d find. It’s literally like new and I paid all of $20 for it.



I’ll probably make my own LED taillight or modify something premade with additional LEDs. I want it bright, very bright.

That looks like a nice match up from that angle. What's it look like from the side?

[Loose Seal]

Side:

[gser425]

looseseal, that is just one bad looking bike. just tough looking but with class. the seat is perfect and for twenty bucks!? makes it even more perfect.

[Charlie G]

Loose Seal,

Tasteful ride!

cg

[Billy Ricks]

thats a factory exh off a stock bike isnt it?? im guessing because of the tight clearences, looks nice whats it off of?

pretty bad v&h /muzzy ect... couldnt put 2x2 together and make a better product, most aftermarket headders are dented because there made with pipes stacked instead of side beside

If your question was meant for me it's a Hindle header and midpipe with a Yosh RS3 can. The pipe was meant for a first generation GSX-R 750. I had a Yosh Duplex on the bike previously that was meant for the last of the oil cooled 750's and it was a much tighter fit under the sump. The Hindle gives me much more ground clearance than the Yosh.

[Mindless]

Here's my work in progress.

[Guest]

Looking very promissing Mr Mindless!

Welcome to the site

[mvalenti]

getting the right stance.....

Lots of eyeballin before the cut n weld....

[Henryinva]

Got the stance nailed! Sawzalls can be yer freind... Commence the hacking, with pics, if ya could be so kind. Members here LOVE seeing a bike go under the blade.

Start a thread though of what yer doing.

Henry