29 smooths

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • anthonygs1000
    • Feb 2026
    #1

    29 smooths

    I spent allot of time polishing these carbs but once you put them on the bike you don?t see that much of them and it does not help the bike go any faster. I bought all the parts to rebuild and rejett from http://www.sudco.com/ I called the guys on the phone they were very helpfull this was my first rebuild I have one more set to do
    Tags: None
    • Tarbash 27
      #2
      I saw a set of 29's completely polished way more than yours are. It went for over a $1000 on ebay. Nice job on yours.

        Comment

        • exhondaguy
          #3
          Those look really nice. How did you polish them with a dremel or by hand?

            Comment

            • Guest
              #4
              Originally posted by anthonygs1000
              I spent allot of time polishing these carbs but once you put them on the bike you don?t see that much of them and it does not help the bike go any faster.
              Nope, you're wrong. Clean polished carbs DO make it go faster!

              Those look great! Nice work. I know from experience how long that took.

                Comment

                • anthonygs1000
                  #5
                  polished

                  I polished some buy hand some with the dremel I used the mothers aluminum polish 7hrs still better than TV and thanks anthony

                    Comment

                    • first timer
                      Forum Sage
                      • Aug 2002
                      • 3429
                      • Tucson, Arizona
                      #6
                      Word of advise, from one binghamton guy to another, if those are emgo pods, toss them immediatly! they are crap and will not flow enough air for those 29's. Get yourself a set of K and N's model number rc-2450 (http://www.knfilters.com/search/prod...x?Prod=RC-2450) or check out APE racing for generic k and n for a little cheap which i hear are good too.

                      BTW, the carbs look great!
                      78 GS1000 Yosh replica racer project, 82 Kat 1000, 10 990 ADV-R, Some dirt bikes

                        Comment

                        • anthonygs1000
                          #7
                          k&N advice

                          10-4 on the pods they were cheep I used them all summer the bike ran
                          a little rich but i only fouled one plug over 5,000 miles this summer
                          But I will try k&Ns the pic of the wes bike is in the other post
                          Last edited by Guest; 05-17-2011, 06:00 AM.

                            Comment

                            • Guest
                              #8
                              Originally posted by first timer
                              Word of advise, from one binghamton guy to another, if those are emgo pods, toss them immediatly! they are crap and will not flow enough air for those 29's. Get yourself a set of K and N's model number rc-2450 (http://www.knfilters.com/search/prod...x?Prod=RC-2450) or check out APE racing for generic k and n for a little cheap which i hear are good too.

                              BTW, the carbs look great!
                              I agree. Get some K&N's. BTW, the right part number is RC-2454. The RC-2450 is the same filter, but that number is for two filters, not four.

                                Comment

                                Previous template Next
                                Working...