'82 GS850L handlebar question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rocketman
    • Feb 2026

    #1

    '82 GS850L handlebar question

    The crazy angle of the "buck horn" handle bars on my 1982 GS850L is really beginning to bother my wrists a lot lately. I've read that I should find a set of bars off a 79/80 E or G model. Are these 79/80 G/E bars the same, so year and model won't matter? Are there any other years and/or models which will be also be compatible with my bike?

    Thanks,

    Sore-wrirst Rocketman.
  • Rocketman

    #2
    Found two on Ebay today as follows. Wondering if these are the same, and if they'll work?



    and

    Comment

    • Dogma
      Forum Guru
      • Sep 2007
      • 7143
      • Mason, OH (SW)

      #3
      Those are better than the stock L bars, but they look like they could be a little straighter. Or maybe not. It's hard to know exactly what you will find comfortable, whether you like to learn forward or sit up. Maybe find a salvage yard and grab hold of a few bars to see what feels good, instead of spending money on more than one set. It's only 4 screws holding them on, and you don't need to change the controls over to know when you'll like.
      Dogma
      --
      O LORD, be gracious to me; heal me, for I have sinned against you! - David

      Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

      --
      '80 GS850 GLT
      '80 GS1000 GT
      '01 ZRX1200R

      How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

      Comment

      • Rocketman

        #4
        I think I prefer to sit straight up or even lean back a bit, rather than leaning forward. The old bones in my back aren't what they used to be.

        Comment

        • kcolton

          #5
          I've got the stock bars off of my 1979 GS850GN; they look a lot like those eBay pictures. PM me and I'll find a way to get you a picture...

          Comment

          Working...