GS 850G-So what?!!

[Guest]

Thx!...........

[Guest]

I quite like it. I'm lurking around the local Harley dealer myself to see if I can score a free take off.

Find me one with a baffle and I'll trade ya. This thing is completly gutted and sounds ok but I want quiet.

What header do you have? I *think* mine is a Kerker or Mac.
The HD tail pipe is 1-3/4 or so and the header is 1-7/8. The tail pipe actually goes inside the header. Not the ideal setup but it works.
Had to make a bracket from a stock peice mounted to the rear peg thing.

[movingdarkness]

Honestly I have no clue. Its what was on it when I got it.
I didnt even notice it till I was about halfway into the project,lol..

Its a 650 katana shaftie wheel.

[Guest]

Its a 650 katana shaftie wheel.

Oh......It works, which is all I care about.

[razooki]

Find me one with a baffle and I'll trade ya. This thing is completly gutted and sounds ok but I want quiet.

What header do you have? I *think* mine is a Kerker or Mac.
The HD tail pipe is 1-3/4 or so and the header is 1-7/8. The tail pipe actually goes inside the header. Not the ideal setup but it works.
Had to make a bracket from a stock peice mounted to the rear peg thing.

I have no clue about what kind of header I have - it came with the bike. All I know is that the outlet is a whopping 2 3/4" so I'll need a mid pipe. My bike has VM29 carbs and pods so I'd like to know if it will be really affected if the muffler inlet is 1 3/4". I would think that the Harley dealer will give me the pair of take offs so I'll let you know.