Replaced choke and brake cables, reused clutch:
Choke/starter: previous owner had replaced the OEM choke cable, moving it from the stem to the left handle. Obviously if your choke is a pull knob below the key you won't have to modify, but if it's on the signal/light control, you'll need to replace. I ordered OEM CABLE,STARTER, part #1102377 from Bikebandit. I don't remember how I determined this was the one, and their site doesn't display the bike this is OEM for, or the OEM part #, but I can tell you it works, though it's perhaps a bit too long. I may reroute to see if I can take up the few inches of extra length, but it works. Maybe someone else can chime on more details for this part #.
clutch - used the existing one, routed around airbox/boots rather than between.
throttle: Parts Unlimited K281572
Hope this helps.
Choke/starter: previous owner had replaced the OEM choke cable, moving it from the stem to the left handle. Obviously if your choke is a pull knob below the key you won't have to modify, but if it's on the signal/light control, you'll need to replace. I ordered OEM CABLE,STARTER, part #1102377 from Bikebandit. I don't remember how I determined this was the one, and their site doesn't display the bike this is OEM for, or the OEM part #, but I can tell you it works, though it's perhaps a bit too long. I may reroute to see if I can take up the few inches of extra length, but it works. Maybe someone else can chime on more details for this part #.
clutch - used the existing one, routed around airbox/boots rather than between.
throttle: Parts Unlimited K281572
Hope this helps.
Comment