Announcement

Collapse
No announcement yet.

Identifying seal 81 750

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Identifying seal 81 750

    Good afternoon.

    I am currently cleaning, replacing seals and gaskets on my 81 750 carburetors.

    They are very clean though a bit of work is being done here and there. (bowls were ran out then drained before parked)
    The bike has been sitting for around 10 years and so my gaskets and seals are to dry to be reused.

    The seal I am trying to replace are located between the bowl gasket and the main carb body.

    I have looked at a few part diagrams but not able to identify this seal.

    Any help will be appreciated!
    Attached Files
Working...
X