VM 29 jet kits

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rputney01
    #1

    VM 29 jet kits

    I've seen references to a stage 3 dj kit for the 29mm smoothbores on the forum, but it isn't referenced on their site that I can find. Is it same kit as the 26mm stock carbs?

    Thanks.
    Tags: None
    • tkent02
      Forum LongTimer
      Past Site Supporter
      • Jan 2006
      • 35571
      • Near South Park
      #2
      Similar question, may be helpful, not trying to jack your thread...

      Stock GS 1000 E engine, V&H pipe and K&N pods, jetted very nicely for the elevations where I ride. How will my jetting requirements change when using VM 29s?

      I know I will have to fine tune but looking for a ballpark to start with.
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35786
          • Torrance, CA
          #3
          Look at this information, there is suggested starting points for jetting...

          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            • rputney01
              #4
              Originally posted by tkent02
              Similar question, may be helpful, not trying to jack your thread...

              Stock GS 1000 E engine, V&H pipe and K&N pods, jetted very nicely for the elevations where I ride. How will my jetting requirements change when using VM 29s?

              I know I will have to fine tune but looking for a ballpark to start with.
              I'm currently jetted at a 122.5 main and a 22.5 pilot on my vm 29's. I took a long time to get it dialed in, particularly at idle. It is running pretty strong right now.

                Comment

                • first timer
                  Forum Sage
                  • Aug 2002
                  • 3429
                  • Tucson, Arizona
                  #5
                  dig through this thread, there should be some base line 29mm info for you. if not do a search I know there are several threads about 29mm jetting on a stock 1000 motor
                  78 GS1000 Yosh replica racer project, 82 Kat 1000, 10 990 ADV-R, Some dirt bikes

                    Comment

                    Previous template Next
                    Working...