I just posted this in another thread but thought I'd put it here where someone might see it. I broke one of the float bowl pegs on a BS32. Tried to glue it with gas tank repair epoxy - no success after a week. Filed the base flat, drilled a pilot hole and used a self tapping screw, and made a peg out of fairly stiff stainless sheet metal. The picture shows what I did. Seems to be holding up after a couple of months at least. Get out your calipers and measure carefully.
-
-
What pictureThe picture shows what I did.
-
call me crazy...but i don't see a picture (and boy, did i EVER want to)
ok.. quick search and found the picture in the OTHER thread...
Comment
-
That's a good fix..pretty cheap and it looks like it will work.Comment
-
It says I have already submitted the picture to this thread. I'll try to start a new one, and pm you a picture so you don't think I'm nuts.Comment
-
OK never mind. Look at the other thread.Comment
-
If you want to post the pic in this thread you probably need to rename the picture and upload it again.Comment
-
One last time, and thanks for the help.Comment
Comment