Carb OEM specs as per factory manuals

84 GS1150

Type----------------- Mikuni BS36SS
I.D. NO. -------------00A10
Bore -----------------36mm
Idle r/min----------- 1100+or- 100r/min
Fuel level------------ 3.0 +- 0.5 mm
Float height---------- 21.4 +- 1.0 mm
Main jet ------------- #120(nos.1&4),#122.5(nos 2&3)
jet needle------------ 5D14
Needle jet ----------- X-3
Pilot jet ---------------#45
By pass--------------- 0.9,0.8,0.9 mm
pilot outlet------------ 0.9 mm
Valve seat------------ 2.0 mm
Starter jet------------ #32.5
Pilot screw------------ PRE-SET (2 turns back)
Throttle valve--------- #130
pilot air jet------------- #125
Throttle cable play-----2-3 mm
choke cable play-------0.5-1.0 mm

[first timer]

i'm waking this up agian,

hey guys lets not stop now, i am pretty sure all we need right now is some pre 1983 gs750 carb info (CV)

some 82-83 gs 1100 g and other similar models.

and the gs1150 carb info.

dig out your books and manuels and lets get this wrapped up so we have a complete list.

thanks,

Here's the carb info for my bikes - not sure where to get some of the info, like bypass, pilot outlet, etc. I can't find it anywhere in the owners manuals or factory service manuals. If someone can tell me where to look, I can dig it up.

1978 GS750E

Specs in mm.
Carb Type- Mikuni VM26SS
Bore Size- 26
ID# - 45030
Idle r/min - 1050 +/- 50
Fuel Level - 2.5-3.5
Float Height - 25-27 mm
Main Jet - #100
Main Air Jet - 0.7
Jet Needle - 5F21-3
Needle Jet - O-6
Pilot Jet - #15
Bypass -
Pilot Outlet -
Valve Seat -
Starter Jet -
Pilot Screw -
Pilot air jet - 1.6
Throttle Cable Play - 0.5-1.0




1977 GS400B

Specs in mm.
Carb Type- Mikuni BS34
Bore Size- mm
ID# - 44012
Idle r/min - 1150 +/- 50
Fuel Level - 6.5 +/-0.5 mm
Float Height - 26.3+/-1 mm
Main Jet - #112.5
Main Air Jet - .06
Jet Needle - 4F23-3
Needle Jet - Y-0
Pilot Jet - 22.5 (another place in the same manual lists #20)
Bypass -
Pilot Outlet -
Valve Seat -
Starter Jet -
Pilot Screw -
Pilot Air Jet - 1.5 (another place in the same manual lists 1.4)
Throttle Cable Play - 1.0-1.5

[jonr]

Ryan,

I PM'd you the specs from my 76-79 GS750 factory service manual. This manual is not near as thorough as the 80's models though. I hope the info is enough.

-jon

[first timer]

hey guys lets not stop now, i am pretty sure all we need right now is some pre 1983 gs750 carb info (CV? and VM)

some 82-83 gs 1100 g and other similar models.

and the gs1150 carb info.

dig out your books and manuels and lets get this wrapped up so we have a complete list.

thanks,

ryan

[first timer]

hey guys can some one post the 82-83 gs 1100 g and other similar models that aren't listed here.

thanks,

ryan

1981 GS1000G(X) GS1000GL(X)

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49160
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #115
Main Air Jet - 1.7
Jet Needle - 5D57-3rd
Needle Jet - X-8
Pilot Jet - #40
Bypass - 0.9, 0.8, 0.8
Pilot Outlet - 0.7
Valve Seat - 2.0
Starter Jet - #45
Pilot Screw -Pre-Set
Pilot air jet - #160
Throttle Cable Play - 0.5-1.0
Choke Cable Play - 0.5-1.0

ANY CARB SPECS FOR '85 GS550E?

Hello guys, do you have any carb specs for 1985 GS550E? Would appreciate any info... Thanks

Just checked the number on the 1000S and it reads

P9
61

Nothing else in that spot.

The round slide (VM series Mikunis) ID is often difficult to find and to see as it is small and engraved into metal. It is on the flange of the outside carb as shown in this picture. The number can be four or five numbers and letters but most Suzuki Mikuni VM carbs seem to be five numbers in the 4nnnnn series. The number in the manual may be 41234 but it will be stamped on as:

4 1 2
3 4

and will be located here:

http://img.photobucket.com/albums/v12/wiredgeorge/carb_id_location.jpg

83 GS550E
Mikuni
BSW30SS
30 mm

It should have 43410 stamped on the side

Fuel level: 6.5 +/- 0.5mm (.26 +/-.02in)
float height: 20.5 +/- 1.0mm (0.81 +/- .04in)
Main jet:
cylinders 1 and 4: 95
cylinders 2 and 3: 102.5
main air jet: 1.0
Jet Needle: 5C64
Clip position: 1 groove from top
needle jet: P-2
Throttle Valve: 120
Pilot Jet: 35
Bypass: 0.8,0.7,0.8,0.8
Pilot outlet: 0.7
Float valve seat: 2.5
starter jet: 55
Pilot screw: Preset

1979 GS1000S

VM28SS

main jet #95
hoofdluchtsproeier 1.5 (main air jet?)
naaldsproeier AO-2
jet needle 5DL3 6-3
stationaire luchtsproeier 1.2
cut-off 1.5
airscrew don't touch :roll:
stationairy screw don't touch :roll:
float height 23-25 mm

I translated the ones I know, maybe you can fill me in on the rest

Model / Year GS1000S 1979
Idle rpm's 900 ~ 1,100 rpm
Carb Type VM26SS
Carb I.D. Number 49010
Bore Size 26
Float Height 23 ~ 25
Fuel Level 3 ~ 5
Air Screw 1.0
Pilot Air Jet #15
Cut-Away 1.5
Jet Needle 5DL36-3
Needle Jet O-4
Main Air Jet 1.5
Main Jet #95

Would like to see more VM type info!!!

Here's some 1000 & 1100 classics..


1980 1100 LT

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49200
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #107.5
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 0.9
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw -Pre-Set, Varies
Throttle Cable Play - 0.5-1.0

1981 1100 EX

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49200
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #107.5
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 0.9
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw -Pre-Set, Varies
Throttle Cable Play - 0.5-1.0

1982 1000 SZ

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49300
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #110
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 0.9
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw -Pre-Set, Varies
Throttle Cable Play - 0.5-1.0
Choke Cable Play - 0.5-1.0

1982 1100 EZ

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49220
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #110
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 0.9
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw - Pre-Set, Varies
Pilot Air Jet - #170
Throttle Cable Play - 0.5-1.0
Choke Cable Play - 0.5-1.0

1983 1100 SD

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49350
Idle r/min - 1050 +/- 50 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #112.5
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 1.0
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw - Pre-Set, Varies
Pilot Air Jet - #160
Throttle Cable Play - 0.5-1.0
Choke Cable Play - 0.5-1.0

1983 1100 ED/ESD

Specs in mm.
Carb Type- Mikuni BS34SS
Bore Size-34 mm
ID# - 49380
Idle r/min - 1050 +/- 100 r/min
Fuel Level - 5.0 +/- 0.5
Float Height - 22.4 +/- 1.0
Main Jet - #112.5
Main Air Jet - 1.2
Jet Needle - 5D58
Needle Jet - X-1
Pilot Jet - #45
Bypass - 0.8, 0.8, 0.8
Pilot Outlet - 1.0
Valve Seat - 2.0
Starter Jet - #32.5
Pilot Screw - Pre-Set, Varies
Pilot Air Jet - #180
Throttle Cable Play - 0.5-1.0

[first timer]

GS850 (77-79) the specs are for the VM's

idle r/min........... 950-1150
carb................... mik vm26ss
id no................... 45060
bore size ............ 26 (1.0)
float height ......... 23-25. (0.91" - 0.98")
fuel level ............ 3.0 - 5.0 (0.12" +/-0.20")
pilot air screw ..... 1.25 turns out
pilot screw........... 5/8 turns out
pilot air jet........... 1.2
pilot jet............... #15
cut away............. 1.5
jet needle........... 5DL36-2 (the -2 2nd notch)
needle jet .......... 0 - 6
pilot outlet........... 0.6
by pass ............. 0.8
main jet............. #102.5



GS850 (80) the specs are for the CV's

idle.................... 1050 +/- 100 r/min
carb................... mik BS32SS
id no................... 45120
bore size ............ 32 (1.26)
float height ......... 22.4 +/- 1.0 (0.88 +/- 0.04)
fuel level ............ 5.0 +/- 0.5 (0.20" +/-0.02")
VALVE SEAT........ 2.0
STARTER JET....... 32.5
PILOT SCREW ..... 3.5
PILOT AIR JET ..... #200
pilot jet............... #42.5
jet needle........... 5D57-3 (the -3 3rd notch)
needle jet .......... X - 6
pilot outlet........... 0.7
BY PASS............. 1.0, 0.8, 0.8
MAIN AIR JET...... 1.7
main jet............. #115