have recently rebuild carbs and pet cock but have fuel runing out of breather box, pet cock seems to be working fine any ideals
-
-
Float height or float needles1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES -
Your float height should be 24mm.-Mal
"The only reason for time is so that everything doesn't happen at once." - B. Banzai
___________
78 GS750EComment
-
Greetings and Salutations!!
Hi Mr. trucker1,
Did you properly rebuild the carbs? The aftermarket "carb kits" are known to be incomplete and contain inferior parts. All you need is an O-ring kit from http://cycleorings.com, a bucket of carb dip, and the proper procedures. Re-use all the metal OEM carb parts, replacing only what is worn or defective with OEM parts. See the guides on my little website.
I see that this is your first post, so here is the "mega-welcome": New Members, CLICK HERE!! Behind that link is links to voluminous amounts of information that I hope you find helpful. Welcome to the forum.
Thank you for your indulgence,
BassCliffComment
Comment