need aftermarket throttle and clutch cables

[byegge]

does anyone know of a company that will (for a decent price) make clutch and throttle cables. im going to installing clip on bars on my project and will need the cables to be much shorter. also is there a way to shorten them my self. im thinking i might get newer handle bar levers and master cylinder off a sport bike, so i might, if i can use the cables that go with those.
81 gs 650g

[MisterCinders]

does anyone know of a company that will (for a decent price) make clutch and throttle cables. im going to installing clip on bars on my project and will need the cables to be much shorter. also is there a way to shorten them my self. im thinking i might get newer handle bar levers and master cylinder off a sport bike, so i might, if i can use the cables that go with those.
81 gs 650g

If custom cables are too expensive, use the old cables to figure out what length you need, then order something from Z1 that comes close to it.

[Agemax]

you can buy cable kits on ebay, or you could find another suzuki which uses shorter cables as standard and fit those. you may get away with just re routing yours if they are not massively too long

[matt1100]

I had a similar problem with my fabbed handlebars. On a tip I received here, on GSR, I used the clutch cable from a GS1000S (flat). Solved my issue, that model came with an old skool superbike style bar and was a good little bit shorter than the highway (neutral) bars fit to most models.

[byegge]

I had a similar problem with my fabbed handlebars. On a tip I received here, on GSR, I used the clutch cable from a GS1000S (flat). Solved my issue, that model came with an old skool superbike style bar and was a good little bit shorter than the highway (neutral) bars fit to most models.

thanks, ill look into that. the bars on this bike are like mini ape hangers. i think if i rerouted them they would loop up about a foot over the head light.

[Big T]

Motion Pro will make you whatever you want

[matt1100]

thanks, ill look into that. the bars on this bike are like mini ape hangers. i think if i rerouted them they would loop up about a foot over the head light.

sorry about that, somehow I convinced myself you where going to shorter bars

[Guest]

Try to stay with OEM clutch cables, they are beefer then aftermarkets. Hopefully you can fine a factory one that will suit your needs.

[slayer61]

Motion Pro will make you whatever you want

+1 I have used Motion Pro with great success. They make a great product. Mix and match components and they can hook you up.

[byegge]

sorry about that, somehow I convinced myself you where going to shorter bars

i am going to shorter bars, i was just stating that the current bars are huge. thats why the current cables wont work, way to long

[Crage]

you are surely not going to any kind of ape hangers then.

[Guest]

There's always these:

[byegge]

you are surely not going to any kind of ape hangers then.

going to instal clip ons