So I installed a new set of boots on my gs850 head. The issue is the carbs don't quite line up, the 2 and 3 carb are a tight fit, the new boots seem to be set further outboard. They are installed with the vaccume ports facing down. Is this correct?
-
-
Yes, vacuum port facing down and out.
Part# 13110-45100 Desc PIPE,INTAKE RH
Part# 13120-45100 Desc PIPE,INTAKE LHEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
If they don't fit they are the wrong part unless you put them on backwards.Comment
-
Yup, looked at the bags and seller had them missed labled. Swapped them around and all is well, old eyes missed the little L and R. Thanks for the help.Comment
Comment