Gasoline Odor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PardonMe4687
    • Feb 2026

    #1

    Gasoline Odor

    Forgive me if this is in the wrong forum, but I didn't know where else to pose the question.

    Ever since rejetting and tuning my carbs, after letting the motorcycle sit in the garage overnight, the garage REEKS of gasoline. Sometimes I can even notice the smell inside the house after coming home from work.

    Any ideas as to why this might be?

    Thanks!
  • fbody_mike
    Forum Mentor
    • Oct 2017
    • 360
    • San Gabriel Valley CA

    #2
    My guess is that a float level is too high and your getting a bit of overflow. Check your oil level too to make sure the gas is not filling the crankcase.
    1981 Suzuki GS250T
    1982 Yamaha Seca Turbo
    1985 Suzuki GS550E
    2004 Suzuki GSF1200S

    Comment

    • PardonMe4687

      #3
      Originally posted by fbody_mike
      My guess is that a float level is too high and your getting a bit of overflow. Check your oil level too to make sure the gas is not filling the crankcase.
      Thanks for the quick reply! I'll check both of these things out.

      Comment

      • Burque73
        Forum Sage
        Past Site Supporter
        • Mar 2016
        • 4711
        • Albuquerque, NM

        #4
        There's also a vent in the gas cap. With the hot weather, the gas expands and fumes vent out the cap. Is your tank full while it's in the garage? I notice a stronger smell when mine has just been topped off and put away, especially in the summer.
        Roger

        '83 GS850G Daily rider
        '82 GS1100GK Work in (slow) progress

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35790
          • Torrance, CA

          #5
          When you check the fuel level measure it directly, not the float height. There is info on the site on how to make some fuel level gauges. It's pretty simple to make some.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          • Guest

            #6
            Everything said below + a much more subtle problem. I had used aftermarket bowl gaskets (still do) but discovered at proper torque specs the gas was seeping and evaporating leaving no trace of leaking but leaving a strong gas smell all the time. I had changed over to SS Alan bolts for the bowls and figured they would take more torque (within reason). They did and the fuel smell went away with an added bonus. Before, I couldn't let my bike sit for more than three days without priming. Now, it can sit for a week or more without a problem. My float levels are spot on motor off or on.

            Comment

            • bwringer
              Forum LongTimer
              Bard Award Winner
              GSResource Superstar
              Past Site Supporter
              Super Site Supporter
              • Oct 2003
              • 17066
              • Indianapolis

              #7
              Leaky petcock is quite possible, too.

              How's your oil level? If you've magically manufactured more oil, then gas has gotten into the engine and is diluting the oil.
              1983 GS850G, Cosmos Blue.
              2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
              2015 Yamaha FJ-09, Magma Red Power Corrupts...
              Eat more venison.

              Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

              Celeriter equita, converteque saepe.

              SUPPORT THIS SITE! DONATE TODAY!

              Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

              Comment

              • Mr.humbucker
                Forum Mentor
                Past Site Supporter
                • Nov 2012
                • 296
                • British Columbia

                #8
                I too get the gas expansion stink when I would park my bike in the garage after filling up the tank to near the top especially when it is warmer out. I have dealt with this by making sure I don't park it witha full but rather 2/3 full tank. I have also found my petcock leaking ever so little from time to time. Whe this has happened I tighten up the securing bolts a tad and it usually solved the problem.
                GS550T 1981
                GS850G 1983
                GS650G 1982
                GS650G 1982 Under Restoration 😳🏍👍

                Comment

                • Guest

                  #9
                  Originally posted by Mr.humbucker
                  I have also found my petcock leaking ever so little from time to time. When this has happened I tighten up the securing bolts a tad and it usually solved the problem.
                  Instead of tightening, replace the petcock washers. The washers seal against the petcock holes and the bolt threads. They are easy to damage especially when old and not expensive to replace.

                  Comment

                  • PardonMe4687

                    #10
                    Turns out the petcock was the culprit. Fuel was leaking out of the vacuum port, down the hose, and out of carb #2. Replaced the petcock, and voila, no more smelly garage. (Though I kind of like the smell, the wife does not)

                    Comment

                    • steve murdoch
                      Forum Guru
                      Past Site Supporter
                      • May 2004
                      • 8491
                      • St. Catharines, On.

                      #11
                      Did you go with a stock petcock or aftermarket?
                      If aftermarket, which one?
                      2@ \'78 GS1000

                      Comment

                      • Mr.humbucker
                        Forum Mentor
                        Past Site Supporter
                        • Nov 2012
                        • 296
                        • British Columbia

                        #12
                        I recently bought some dowty washers, rubber center and metal outer makes for a good seal for the petcock bolts.
                        GS550T 1981
                        GS850G 1983
                        GS650G 1982
                        GS650G 1982 Under Restoration 😳🏍👍

                        Comment

                        • PardonMe4687

                          #13
                          Originally posted by steve murdoch
                          Did you go with a stock petcock or aftermarket?
                          If aftermarket, which one?
                          Due to limited funds, I opted to go for the unbranded ebay version. So far I have no complaints. Two weeks on and no leaks, and no more gasoline smell. I'll report back if any issues arise.

                          Comment

                          • Big T
                            Forum LongTimer
                            Past Site Supporter
                            Super Site Supporter
                            • Mar 2005
                            • 12392
                            • West Slope, OR

                            #14
                            Originally posted by PardonMe4687
                            Turns out the petcock was the culprit. Fuel was leaking out of the vacuum port, down the hose, and out of carb #2. Replaced the petcock, and voila, no more smelly garage. (Though I kind of like the smell, the wife does not)
                            Just FYI, gasoline is at its most explosive and combustible state as a vapor.
                            1978 GS 1000 (since new)
                            1979 GS 1000 (The Fridge, superbike replica project)
                            1978 GS 1000 (parts)
                            1981 GS 850 (anyone want a project?)
                            1981 GPZ 550 (backroad screamer)
                            1970 450 Mk IIID (THUMP!)
                            2007 DRz 400S
                            1999 ATK 490ES
                            1994 DR 350SES

                            Comment

                            Working...