1979 GS750E Orphan Wires

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Runningdog
    Forum Apprentice
    Past Site Supporter
    Super Site Supporter
    • Mar 2022
    • 46
    • West Kelowna, BC

    #1

    1979 GS750E Orphan Wires

    I just came across a couple pairs of orphan wires, Black/yellow, and white: male connectors at coil area, and female ones adjacent to regulator. There appears to be display for gears in the dash. Did the 1979 have gear display? Just one more clue that my bike basket project is a bitsa. Wish I knew where a complete bike was, close to me, that I could visually compare.
  • rphillips
    Forum Guru
    Past Site Supporter
    Super Site Supporter
    • Jun 2005
    • 7611
    • Norene TN

    #2
    Yes it surely did.
    1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

    Comment

    • Runningdog
      Forum Apprentice
      Past Site Supporter
      Super Site Supporter
      • Mar 2022
      • 46
      • West Kelowna, BC

      #3
      Thanks, this helps a lot, now I can chase down what is missing in between the two wire pairs.

      Comment

      • Rich82GS750TZ
        Forum Guru
        Past Site Supporter
        Super Site Supporter
        • Jun 2018
        • 5569
        • Mifflinburg, PA / Land of Tar & Chip

        #4
        Runningdog, if you’re in need of a factory service manual, you can download a pdf from BikeCliff’s Website. You want the GS750 (8 valve)…. In the middle column. There’s a wiring diagram toward the end. Link to BikeCliffs’s in my signature.
        Links

        Comment

        • Runningdog
          Forum Apprentice
          Past Site Supporter
          Super Site Supporter
          • Mar 2022
          • 46
          • West Kelowna, BC

          #5
          Thanks, Rich, I have the manual. and the wiring diagram. As I have been sorting through the boxes of parts and so on that came with this basket bike, I keep coming up with the odd hint that some parts may have come from an 850 (which I have some familiarity with, but its been ten or so years since I rebuilt that one). Much mantling and dismantling goes on until an assembly stays in one piece.

          Comment

          • Runningdog
            Forum Apprentice
            Past Site Supporter
            Super Site Supporter
            • Mar 2022
            • 46
            • West Kelowna, BC

            #6
            Farm out, found the wiring, and determined that the gear display works. Got the Dyna S installed and timed this morning, as well. Just waiting for the new airbox boots, and this puppy is just about ready to fire up.

            Comment

            Working...