Announcement
Collapse
No announcement yet.
Whoops!! May need some help
Collapse
X
-
Fizzyhair
Whoops!! May need some help
I just disconnected the two Block connectors in the loom just between the two ignition coils under the tank. I notice now that there are some loose pushfit leads on each loom that are also disconnected. Is that normal? Or have I unplugged something else? Obviously it'll be obvious later but it'd be nice to not have to re assemble the bike to find out lolTags: None
-
dr_fosg8
Not sure what you mean by pushfit, crimp on style connectors? Do you have any pictures of the wiring in question? I would recommend checking basscliffs website and see if there is a wiring diagram or manual available there. That would go a long way to setting the wiring aright.
-
Fizzyhair
.png)
Comment