LED Blinkers 650E

[GateKeeper]

Nope, as far as I know....mine blink until I move the switch back to neutral position

does it do the same if you turn the right blinker on ?

.

[Steve]

If I turn my key to on and turn the left signal on it will click over once or twice then stop. Is that normal?

Just a random question while I remembered it lol

Is the bike running?

What is the battery voltage?

Some flashers do not like to work if the voltage is a bit low.

.

[GS650E_81]

Bike is not running - off.

I will try the right blinker today. The voltage was a little low when a friend of mine tested it last year.

[GS650E_81]

Right blinker works with the bike off. Left will blink 3 times then stop...hmm.

[GS650E_81]

I just received the module, you are right GateKeeper, it does take a while to receive the part. Almost a whole month...

Anyway, I checked my current module and it appears to have a connector with only two prongs on it. I see this new one has three prongs.

Which prongs do I plug the connection into on the new one?

I hope this makes sense.

Also - I have never wired turn signals before, can I pick up some LED signals from ebay and just wire then straight up? Or will I need to do some modifications?

[GateKeeper]

Yup, they sure are slow in arriving, mine took about the same...

now go here to see how to hook up

http://www.thegsresources.com/_forum/showthread.php?t=196017

I got cheap LED Blinkers from some China site on EBay there were 4 for 10 bucks and free shipping, took out the original ones, plugged the LED ones into the existing wiring, put in the new flasher and all was good...

[GS650E_81]

Yup, they sure are slow in arriving, mine took about the same...

now go here to see how to hook up

http://www.thegsresources.com/_forum/showthread.php?t=196017

I got cheap LED Blinkers from some China site on EBay there were 4 for 10 bucks and free shipping, took out the original ones, plugged the LED ones into the existing wiring, put in the new flasher and all was good...

I looked at the link you posted. What are the wires connected to in the first two pictures?

On my bike the wiring harness has a connector that only has two prongs on it and its white...

Sorry - this stuff is all new to me

[GateKeeper]

Well, you got me, mine had 3 but I had to switch 2 of the wires around for it to work

Unfortunately I am no electrical guru, far from it, but I gambled, and plugged it in one way, it didn't work, then plugged it in the other way and it worked, then I swapped the wires so the relay would sit the correct way.

now come to think of it, my original relay only had 2 prongs as well, even though I had 3 wires in the harness only 2 went on the original relay the 3rd was attached to nothing...

[GS650E_81]

Hm... Okay I will look at it again further when I go to put the signals on.

Thanks for the help!