Solid State Power Box

[salty_monk]

There's always a way.... With the SH775 it doesn't leave much room on the panel. I can extend it but then it would stick out below the side panel.

It maybe that I instead move the flasher & perhaps the started solenoid... that's an option too.

[posplayr]

There's always a way.... With the SH775 it doesn't leave much room on the panel. I can extend it but then it would stick out below the side panel.

It maybe that I instead move the flasher & perhaps the started solenoid... that's an option too.

Dan,
Ed's bike has the full size fuse box and fitted the SH-775 but without the bulky connector. . Not sure why the side panel is so different to the skunk.
Jim

[posplayr]

I have a few orders coming in for SSPB's this week. So if you have been on the fence about moving forward, please considering doing it now. There is a lot of work to getting these things assembled and doing them in batches is much easier.

I'm seeing a lot more work coming in the near future on other moto projects , so lead times for the SSPB will likely lengthen in the future. I'm running out of the diagonal tabbed version, but still have a few symmetrical tabbed version. Most of my reserve is the tabless versions.

[gspower]

I have a few orders coming in for SSPB's this week. So if you have been on the fence about moving forward, please considering doing it now. There is a lot of work to getting these things assembled and doing them in batches is much easier.

I'm seeing a lot more work coming in the near future on other moto projects , so lead times for the SSPB will likely lengthen in the future. I'm running out of the diagonal tabbed version, but still have a few symmetrical tabbed version. Most of my reserve is the tabless versions.

I'd like to put an order in but I'm running a GS425 and wanted to make sure someone else has done this before. I'm not sure I even have a fuse box on the old bike. Will this help me? This project is going to be the end of me.

[tkent02]

I'd like to put an order in but I'm running a GS425 and wanted to make sure someone else has done this before. I'm not sure I even have a fuse box on the old bike. Will this help me? This project is going to be the end of me.

I'm putting one on my 550 which has only the one single fuse. It should work, but it will be a little more work to separarte out the circuits.

[astradaryl]

Yup same here I'm putting one on my 77 gs750 that has no fuse box

[Guest]

Any units available? or plans for making some more?

[posplayr]

Any units available? or plans for making some more?

I have a few other people looking. I could get another run done in the next month or so. Email me at solidstatepowerbox@gmail.com.

[Guest]

wouldn't work to that email, sent one to your direct email.

[posplayr]

wouldn't work to that email, sent one to your direct email.

Sorry, the period in @gmail.com was missing.

[occam22]

spoke to you via email but I thought Id also post up here to be in on the next run.

[posplayr]

spoke to you via email but I thought Id also post up here to be in on the next run.

OK Anybody else want in on the next run let me know. I have a few things to get out of the way but plan on finishing by about the end of the month. email me at solidstatepowerbox@gmail.com

the diagonal tabbed ones are limited but there are plenty of tabless.

[posplayr]

OK Anybody else want in on the next run let me know. I have a few things to get out of the way but plan on finishing by about the end of the month. email me at solidstatepowerbox@gmail.com

the diagonal tabbed ones are limited but there are plenty of tabless.

I'm looking to do another run. I'm starting to run out of cases and heatsinks although there are plenty of boards and other electronics parts.

I have emailed a few people that have asked, so if you have been thinking about getting one let me know soon.

$158 shipped domestic, $163 to Canada. Will be shipped before July 3rd is you get in soon.

[jwhelan65]

Did you get enough to do this?

[posplayr]

Did you get enough to do this?

I'm running late; Plan to get them done by end of next week. Probably the last run.