Bike stalled while riding

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • koolaid_kid

    #16
    Get the SH-775 from a Polaris dealer.

    Comment

    • ShaggyRider

      #17
      With the sh-775 wont I need the adapter harness as well?

      Comment

      • BigD_83
        Forum Sage
        Past Site Supporter
        • May 2011
        • 4872
        • Vancouver

        #18
        Jack's a good guy and helpful, but you would be paying a premium to go with his stuff.

        As KK said, you can get the required parts from Polaris. You do not absolutely need the adaptor. In fact, the plugs are a little cumbersome in some of the bikes. I found them to fit a little tight in the stock location on the 650G leading to some less than desirable tension in the wiring.

        If you are a DIY kind of guy, then you can make the connections on the R/R and fill in with some sort of silicone. I can't recall if it was Posplayr, Matchless or somebody else (Nessism?) that had a thread on it
        '83 GS650G
        '83 GS550es (didn't like the colours in the 80's, but they've grown on me)

        Comment

        • tom203
          Forum Guru
          Past Site Supporter
          • Aug 2010
          • 8925
          • Norway,Maine

          #19
          You can just use spades and connect direct- no nonsense with odd wire colors!
          1981 gs650L

          "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

          Comment

          Working...