Are ALL the connections made inside the headlight bucket ?
Headlight
Collapse
X
-
Tags: None
-
StephenStone -
Danb4563
Not all of the connections are made in the bucket, but most of them are. Which connector are you trying to find? I'm currently breaking down an 81, so I could most likely spot it easily on this frame.Attached FilesComment
-
bonkas
There seems to be a whole lot of loom, just wondering if the rt & lt controls are connected OUTSIDE the bucket. Any pictures showing where the grounds are bolted would be a great help as well.
posplayr, your manuals must be way better than mine, I have the wiring digram, but that doesn't show where stuff fixes to the bike & the routing digram, which is some help, but not great.Comment
-
Comment
-
Are you using the Factory manual? I haven't looked at the 650 one but they usually have a good diagram showing where all the loom fits. If you haven't got that one you can download it from Cliff's site:
79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
Danb4563 -
Pg 49 of the manual....................Are you using the Factory manual? I haven't looked at the 650 one but they usually have a good diagram showing where all the loom fits. If you haven't got that one you can download it from Cliff's site:
http://members.dslextreme.com/users/bikecliff/Comment
-
bonkas
Comment
-
Yep, just about as simple as this, which is a bit more inclusive:
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
bonkas
Well, this manual, printed by suzuki in Japan in March '81 PN: 99000-85700-OE3, has 335 pages in 10 sections, but it doesn't have a page 49, the wiring routing diagram is OK as far as it goes, but doesn't tell me everything, that is why I ask questions. I always look at the book before asking, or use the search option, on this forum, but haven't had much luck with that feature.
Thanks anyhow.Comment
-
Sorry for the short comings of your manual. The manual I looked at is avaliable for free download form bad lifts sight. Do you have an internet connection?Well, this manual, printed by suzuki in Japan in March '81 PN: 99000-85700-OE3, has 335 pages in 10 sections, but it doesn't have a page 49, the wiring routing diagram is OK as far as it goes, but doesn't tell me everything, that is why I ask questions. I always look at the book before asking, or use the search option, on this forum, but haven't had much luck with that feature.
Thanks anyhow.Comment
-
The "page 49" to which he refers is page 333 of 335 in the manual that was also linked. I just looked, apparently it is page 49 of the supplement for the '82 650G.
Since you have just the basic manual, look on page 10-30. When your internet connection comes back up, feel free to download the manual from BassCliff's site, you will get the supplement, as well.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment