woven cloth wiring cover.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    woven cloth wiring cover.

    Anyone know where I can get the cloth cover that goes over some parts of my wiring harness? Or at least something similar?

    Paul Jones
  • roeme
    Forum Sage
    Past Site Supporter
    • Jul 2015
    • 1206
    • Switzerland

    #2
    Um, I assume you're referring to the heat resistant sleeving over some parts of the wiring? Ebay gives you quite a few results if you search for "high temperature wire sleeve", for example (it's not cloth IIRC).

    If you leave out the high temp, you get all sorts of sleeving.

    Personally, I like spiral wire wrap/sleeve, which can be wound around existing looms. I'll update one of my threads later on with a picture where I have used this.
    #1: 1979 GS 550 EC "Red" – Very first Bike / Overhaul thread        New here? ☛ Read the Top 10 Newbie mistakes thread
    #2: 1978 GS 550 EC "Blue" – Can't make it a donor / "Rebuild" thread     Manuals (and much more): See Cliff's homepage here
    #3: 2014 Moto Guzzi V7 II Racer – One needs a runner while wrenching
    #4: 1980 Moto Guzzi V65C – Something to chill

    Comment

    • Guest

      #3
      From a UK supplier, so postage may kill the deal.

      Automotive wirng loom expandable braid with working temperature of -50°C to +150°C and a resistance to most chemicals


      Useful where wiring comes in direct contact with the engine, eg oil pressure switch.

      Comment

      • fastbysuzuki
        Forum Mentor
        Past Site Supporter
        • Nov 2012
        • 996
        • Wyre, Lancashire.uk

        #4
        Any decent electrical suppliers ( Especially the ones that sell replacement cooker/grill elements ) should stock the stuff you are looking for it's used quite a bit in electrical cookers.
        The big guy up there rides a Suzuki (this I know)
        1981 gs850gx

        1999 RF900
        past bikes. RF900
        TL1000s
        Hayabusa
        gsx 750f x2
        197cc Francis Barnett
        various British nails

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35787
          • Torrance, CA

          #5
          Suzuki used non adhesive harness wrap tape. Elliott Tape makes various grades of this material. Some high temp and some regular.

          Here is some cloth type...http://www.ebay.com/itm/Elliott-ET93...9UWCSC&vxp=mtr

          And high temp type...http://www.ebay.com/itm/Super-Hi-Tem...3D111143615559
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          • Grimly
            Forum Guru
            Past Site Supporter
            Super Site Supporter
            • Sep 2012
            • 5761
            • Ireland

            #6
            Originally posted by steveb922
            From a UK supplier, so postage may kill the deal.

            Automotive wirng loom expandable braid with working temperature of -50°C to +150°C and a resistance to most chemicals


            Useful where wiring comes in direct contact with the engine, eg oil pressure switch.
            And looky here - there's something interesting...
            Dave
            '79 GS850GN '80 GS850GT
            Only a dog knows why a motorcyclist sticks his head out of a car window

            Comment

            • argonsagas
              Forum LongTimer
              Charter Member
              GSResource Superstar
              Past Site Supporter
              • May 2002
              • 18761
              • Toronto, Canada

              #7
              I have only ever used vinyl electrical tape to partially re-wrap or even totally rebuild a harness.

              Never had a heat problem with it....perhaps because I tied the harness away from most heat sources, but I don't recall doing that.

              Comment

              • Nessism
                Forum LongTimer
                GSResource Superstar
                Past Site Supporter
                Super Site Supporter
                • Mar 2006
                • 35787
                • Torrance, CA

                #8
                Originally posted by argonsagas
                I have only ever used vinyl electrical tape to partially re-wrap or even totally rebuild a harness.

                Never had a heat problem with it....perhaps because I tied the harness away from most heat sources, but I don't recall doing that.
                Electrical tape make the harness a sticky mess if you have to ever make a repair. That's why the OEM's use non adhesive tape instead.
                Ed

                To measure is to know.

                Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                Comment

                • bobgroger
                  Forum Sage
                  Past Site Supporter
                  • Jun 2013
                  • 2481
                  • Enumclaw, WA

                  #9
                  I bought a roll of this. Not exactly the original, but nice. Exactly matches my BMW car.
                  sigpic
                  09 Kaw C14 Rocket powered Barcalounger
                  1983 GS1100e
                  82\83 1100e Frankenbike
                  1980 GS1260
                  Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

                  Comment

                  • Guest

                    #10
                    I found a couple of places to order from cheap. A few dollars for 3 feet of sleeving however, U.S. companies seem to want $25.00 USD to ship to Canada. It actually costs about $5.00 for shipping. They just pocket the other $20.00. Do they not want Canadian business? That's one of the reasons business with China is flourishing.

                    Comment

                    • bobgroger
                      Forum Sage
                      Past Site Supporter
                      • Jun 2013
                      • 2481
                      • Enumclaw, WA

                      #11
                      Originally posted by nastyjones
                      I found a couple of places to order from cheap. A few dollars for 3 feet of sleeving however, U.S. companies seem to want $25.00 USD to ship to Canada. It actually costs about $5.00 for shipping. They just pocket the other $20.00. Do they not want Canadian business? That's one of the reasons business with China is flourishing.
                      My guess is they want to be compensated for filling out the customs declaration. It is somewhat time consuming. Works both ways though, I bought some parts from Canada, parts were $30US, so was shipping. It was a toss up buying new from Partzilla but they were not in stock.
                      sigpic
                      09 Kaw C14 Rocket powered Barcalounger
                      1983 GS1100e
                      82\83 1100e Frankenbike
                      1980 GS1260
                      Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

                      Comment

                      • steve murdoch
                        Forum Guru
                        Past Site Supporter
                        • May 2004
                        • 8491
                        • St. Catharines, On.

                        #12
                        Paul, i have no idea on their pricing but they do offer several types of loom.
                        Don't know if Canada Post will be any cheaper.
                        2@ \'78 GS1000

                        Comment

                        • Guest

                          #13
                          Originally posted by bobgroger
                          My guess is they want to be compensated for filling out the customs declaration. It is somewhat time consuming. Works both ways though, I bought some parts from Canada, parts were $30US, so was shipping. It was a toss up buying new from Partzilla but they were not in stock.
                          Maybe so, but I still say a reputable retailer wouldn't offer a cheap product then try to make it up with shipping. Canada or the U.S.

                          Comment

                          • Guest

                            #14
                            Originally posted by steve murdoch
                            Paul, i have no idea on their pricing but they do offer several types of loom.
                            Don't know if Canada Post will be any cheaper.
                            https://www.picocanada.com/en/index....ducts&id1=Loom
                            Thanks Steve, but I don't need 100' and that's all they offer.

                            Comment

                            • Guest

                              #15
                              How much do you actually need? If you're after the material I referenced in post #3, I have several feet of it here, and would be happy to forward some.

                              Comment

                              Working...