Yoshimura Pro-gress 2 Digital Meter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hokano12
    Forum Apprentice
    • Mar 2020
    • 39
    • Portland, OR

    #1

    Yoshimura Pro-gress 2 Digital Meter

    Just wanted to share this here! Hyped on this little thing! Put on a Yoshimura pro-gress 2 for my gs425. Shows you your oil temp, battery voltage, and the time. Pretty cool little device, looks good on the bike too. Has 2 thermo sensors if you have a liquid cooled bike as well so you can monitor the oil and liquid. But for my air cooled twin I just hooked up 1 sensor to the oil. Pretty cool .
    image0.jpg
    1979 GS425
  • Hokano12
    Forum Apprentice
    • Mar 2020
    • 39
    • Portland, OR

    #2
    Here's another photo of it on the bike.

    pic.jpg
    1979 GS425

    Comment

    • RustyTank
      Forum Mentor
      Past Site Supporter
      • Sep 2018
      • 469
      • Edmonds, WA

      #3
      Originally posted by Hokano12
      Just wanted to share this here! Hyped on this little thing! Put on a Yoshimura pro-gress 2 for my gs425. Shows you your oil temp, battery voltage, and the time. Pretty cool little device, looks good on the bike too. Has 2 thermo sensors if you have a liquid cooled bike as well so you can monitor the oil and liquid. But for my air cooled twin I just hooked up 1 sensor to the oil. Pretty cool .
      Cool little device! I love the idea of being able to see the battery voltage. But tell me, and I realize this may seem like a stupid question but I don't know what I don't know, why do you want to know your oil temp? Is there a point at which it can all go south if it gets to hot?
      Last edited by RustyTank; 08-04-2020, 05:29 PM.
      Ryan

      1979 GS850G - currently undergoing a major overhaul
      1986 GSX-R750 - I'm figuring it out

      Comment

      • Hokano12
        Forum Apprentice
        • Mar 2020
        • 39
        • Portland, OR

        #4
        Piece of mind and security I guess haha
        1979 GS425

        Comment

        • Grimly
          Forum Guru
          Past Site Supporter
          Super Site Supporter
          • Sep 2012
          • 5802
          • Ireland

          #5
          Originally posted by RustyTank
          , why do you want to know your oil temp? Is there a point at which it can all go south if it gets to hot?
          Nice to know how hot it's getting. Over 130*C is caution territory and stop ragging it, let it cool down a bit.
          Summertime use of the fairing has brought that home to me. Ideally, there should be sufficient airflow through the gap anyway, but it's less than optimal.
          That's why I don't use anything but synthetic now.
          Dave
          '79 GS850GN '80 GS850GT
          Only a dog knows why a motorcyclist sticks his head out of a car window

          Comment

          • Hokano12
            Forum Apprentice
            • Mar 2020
            • 39
            • Portland, OR

            #6
            I set a warning on the meter to 250f (121c). It is nice to keep an eye on temp especially in hot weather. Running Rotella t4 in my bike currently.
            1979 GS425

            Comment

            • RustyTank
              Forum Mentor
              Past Site Supporter
              • Sep 2018
              • 469
              • Edmonds, WA

              #7
              Originally posted by Grimly
              Nice to know how hot it's getting. Over 130*C is caution territory and stop ragging it, let it cool down a bit.
              Summertime use of the fairing has brought that home to me. Ideally, there should be sufficient airflow through the gap anyway, but it's less than optimal.
              That's why I don't use anything but synthetic now.
              So, I don't mean to hijack this thread, this is the last I'll ask about it, what can happen to the engine if the oil gets to hot?

              Originally posted by Hokano12
              I set a warning on the meter to 250f (121c). It is nice to keep an eye on temp especially in hot weather. Running Rotella t4 in my bike currently.
              Wow! It has a warning setting? That's super cool. Mind posting a link where you purchased it?
              Ryan

              1979 GS850G - currently undergoing a major overhaul
              1986 GSX-R750 - I'm figuring it out

              Comment

              • Gorminrider
                Forum Sage
                Past Site Supporter
                • Aug 2012
                • 4803
                • British Columbia, Canada

                #8
                I think the clock is nice too! (I have a watch strapped on all my bikes...)

                Comment

                • Guest

                  #9
                  Originally posted by RustyTank
                  Cool little device! I love the idea of being able to see the battery voltage. But tell me, and I realize this may seem like a stupid question but I don't know what I don't know, why do you want to know your oil temp? Is there a point at which it can all go south if it gets to hot?
                  Excessive oil temps can cause thermal breakdown of the oil which leads to less than ideal lubrication.

                  Ideally you want to run the oil hot enough (>212 F) to boil off any water condensation in the oil but keep it below 250 F to prevent thermal breakdown.

                  A thermostat/oil cooler combo helps keep the oil temp in the ideal range, especially if your engine has any motor work which would cause higher than stock oil temperatures or you are running it hard in a hot climate.

                  Before I installed an oil cooler/215 degree thermostat, my oil temps would routinely get over 290 degrees, which is waaay too hot. Now it stays in the 210-230 range.

                  Comment

                  • RustyTank
                    Forum Mentor
                    Past Site Supporter
                    • Sep 2018
                    • 469
                    • Edmonds, WA

                    #10
                    Originally posted by 80GS1000
                    Excessive oil temps can cause thermal breakdown of the oil which leads to less than ideal lubrication.

                    Ideally you want to run the oil hot enough (>212 F) to boil off any water condensation in the oil but keep it below 250 F to prevent thermal breakdown.

                    A thermostat/oil cooler combo helps keep the oil temp in the ideal range, especially if your engine has any motor work which would cause higher than stock oil temperatures or you are running it hard in a hot climate.

                    Before I installed an oil cooler/215 degree thermostat, my oil temps would routinely get over 290 degrees, which is waaay too hot. Now it stays in the 210-230 range.
                    Thanks for the pic. That is really, really cool
                    And thanks for the explanation 80GS1000. That's great information.
                    Ryan

                    1979 GS850G - currently undergoing a major overhaul
                    1986 GSX-R750 - I'm figuring it out

                    Comment

                    • Hokano12
                      Forum Apprentice
                      • Mar 2020
                      • 39
                      • Portland, OR

                      #11
                      Damn that is a nice set up! Looks great
                      1979 GS425

                      Comment

                      • Hokano12
                        Forum Apprentice
                        • Mar 2020
                        • 39
                        • Portland, OR

                        #12
                        Looks like its sold out now but this is where I got it from https://japan.webike.net/
                        1979 GS425

                        Comment

                        Working...