.png "Powered by vBulletin")
Why not use the pan as the top section of the mold?
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Ed. I only have the one pan for the seat on the current ongoing skunk project. So if i had a spare pan that would work with the release agent and all id have to mold is the surface of the seat itself. As it looks now the easiest thing to do is make the fiberglass mold of the pan and clamp the two together like he did in the video.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
If anyone has an old seat pan they would donate to the experiment ill gladly accept.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I read that saran wrap makes a suitable wrapper for the part to be molded into a form. Painters wrap is self adhesive and strips of that might work also, there's a pourable foam that is used to make molds for injection molding parts, the guy at FB-stuff.com makes Honda sidecovers that way. He got a good pair of 76 Super Sport sidecovers to make a mold from on a friday, and monday morning he had them for sale. It's a part time gig or he would likely be making them for everything.Comment
-
Yes plastic wrap or green tape to cover the part being molded. WD40 as the release agent then start laying on the fiberglass. Ill make a top foam mold and a pan mold. Marry them and pour. Mind you this is gonna be an ongoing venture but i will post pics at some point.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
Comment