how do you tension your chain

[koolaid_kid]

Yes, that is the type of master link I use. Never had one fall off as some have reported. This year I added some wire wrap like the racers use, so it will never fall off.
I use an air grinder to grind down the rivet, then an old chain breaker I bought back in 79 when I was racing motocross to remove the rest of the pin. Works fine.
If you go with that type of master link the only thing you have to worry about is getting the side of the link in place and getting the keeper in place. I used a pair of angled vice grips (HF specials) this time and it was a breeze.

[gs77]

perfect guys you were all very helpful ordered the chain sprockets master link and chain breaker hope to receive everything as soon as possible I am eager to ride my bike !!

[Tech73]

Here is a link I used on how to do the string alignment method.

http://www.yamahafz1oa.com/sportryderswheelalignmentmethod.shtml

[koolaid_kid]

Thanks for the link, Tech73. This would be a good link for BassCliff's web site.

[Guest]

I've always used the split master link for that last 32 years, never had a problem. Just apply silicone over the clip to double secure it.

[Guest]

I have a new "endless" chain on my GS1100 and an old chain with materlink on my GS1000, it hasn't fallen off yet. When that one needs replaced I already have a new chain to put on it, and both types of master links. Both chains are 630.

[koolaid_kid]

Last year I used safety wire and these pliers on my master link: Safety Wire Pliers That thing won't come off until I tell it to come off.