Thought?
Announcement
Collapse
No announcement yet.
What to do?
Collapse
X
-
What to do?
It was -30 Celcius yesterday when I tried to remove the side covers from my 80 gs1100. The rubber grommet that holds the tab on the right side cover was so stiff that it broke the tab off. Is there any way that Crazy glue or maybe Jb Weld might make a permanent repair or should I rebuild it using one of the methods here. Maybe I should just look for another side cover?
Thought?80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgradesTags: None
-
Devcon Plastic Welder. Its a two part epoxy style adhesive that bonds like noones business and wont let loose. put the piece back in line with the crack after applying the glue and maybe a little on the outer perimeter to act as a reinforcement. Let it cure over night and you should be all set.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
Comment