Highway pegs

[Guest]

What is the diameter of the engine case savers on a 1980 GS1100L? I want to purchase some highway pegs but they are offered in one inch and one and a quarter inch.

[Guest]

Bump bump bump bump!

[JHawkins]

What is the diameter of the engine case savers on a 1980 GS1100L? I want to purchase some highway pegs but they are offered in one inch and one and a quarter inch.

I suspect it would depend on the brand of case savers. Mine are probably inch, I know they are very small (750L) My cousin had big thick bars on his 850. Seems likely that you will have to measure.

[Guest]

Stock

I have just stock. They are oval and measure one inch and a quarter accross the top and one inch up and down. That's why I'm confused.
Thanks

[honestdon]

I guess you would mount them to the vertical section that is one inch. I found a pair in a motorcycle graveyard while looking for a signal light.:-D Never thought to measure before hand, so I lucked out.

[tconroy]

I have just stock. They are oval and measure one inch and a quarter accross the top and one inch up and down. That's why I'm confused.
Thanks

They are 1 inch.I bought a pair that had an adapter to go either way.Look around,thier are plenty to choose from.